Do you have any idea about how to add blackout lining to existing curtains?
Well, do not worry because we will help you out on this one. Stay with us until the end of this article to know more.
Curtains are often used to block too many shades of sunlight and to avoid the noise around.
It also protects you in terms of giving you privacy from the people outside your UK house.
But if you wish to give it better coverage adding a lining to your existing curtains would be a great idea.
You should know how to make a second layer of your curtains, especially when you already have a base.
A blackout curtain can be plain white or any other color.
You can make this as a lining at the back.
Hide it at the back of your curtains so that the design and color of the curtain will remain.
Steps To Add Blackout Lining To Existing Curtains
Blackout curtains or lining from the name itself makes every curtain even thicker and blacks everything.
It is to provide even more efficient and pleasant coverage for your rooms.
If you are a night person, you need this.
Adding another layer or a lining to your curtains is not hard as long as you have a guide to follow.
And, of course, you need all the materials to come through with it.
But then chill and do not worry.
We will help out with this one.
Here are steps on how to add blackout lining to existing curtains:
Step #1. Remove the curtain on the rod
The first thing you need to do is to get off your curtains on the rod and make sure that you clean it first.
You cannot just sew a lining on a dirty curtain, so make sure that you take care of the cleaning process on it.
Just remove all the dust in it and wash it after together with the lining to soften.
Step #2. Get the measurements
It would help if you got the measuring tape at least 10 feet long, ensuring that your curtain would fit in.
Take the width and the length of your old curtain to make sure that you measure rightly.
It should be the precise amount of each side, or else you will suffer while stitching later.
Step #3. Cut the blackout fabric needed
The third step would be cutting out the fabric, but then you need to put measurements first.
You can use a tailor’s chalk or any marking tool for curtains that is visible and easy to wash later on.
Add at least ½ inch of extra fabric on each side.
You will need this when you sew a curtain later on.
Cut the fabric after you have marked it.
Step #4. Start assembling both fabrics and pin
Lay your top curtain on the floor flat, and then you will be putting fabric lining on top.
Make sure that the front of your old curtain faces the floor.
You will sew the next layer at the back.
When you pin, make sure that you fold the ½ extra fabric inside one of the sides.
Then you can flip both curtains and pin the other two sides, leaving aside open as a door for flipping it over again.
Step #5. Sew all the three
You will then start sewing all those three sides, making sure it is aligned and looking good.
Do check if how your curtains you want.
The stitch should be clean and precise so that it will look good.
Then sew the last side you left open earlier.
Sew ¾ of it and then flip it over, revealing the outside look.
After making sure that it is looking fine and pleasant, you can stitch all over the remaining ¼ of the last side.
Step #6. Hang it again on your curtain rod
And just like that, you can try to figure out how you did well and if the process was effective.
Insert the rod in your curtain and secure it again, making sure it won’t fall down the rod.
The shape should remain, and the look and color are the same, only that the room should be darker and the noise is lessened.
As you hang it on your wall, try to observe for some time if it is effective and if your curtain still looks the same.
Even when you notice minimal changes, that is normal because you added something, and the fabric will be a bit harder.
You can wash it so that the fabric will soften for a bit since it is soaked in fabric conditioners and powder.
If you think you made a step wrong, you can always backtrack and look for errors there.
Just add a bookmark on this page or take a screen capture to make sure.
If you want to learn how to wash this kind of curtains, then click here.
That is all.
Conclusion
And we are now at the end of our article we hope that you will be able to apply these steps.
Good thing we answered, how to add blackout lining to existing curtains, you now have an idea about it.