Hanging curtains is a great way to project the style you want in a room. Often, when moving into a new home or apartment in the UK, the big challenge is always what type of curtain to put up and how to choose the curtain’s best material. After selecting the type of curtain comes another concern which is how to hang the curtains on a wall.
To answer such an important question, I have researched and experimented with fast and straightforward ways on how to hang curtains on a wall.
You may see many people in the UK choosing different patterns and steps to hang their curtains; however, you need to follow professional ways and steps when hanging curtains on the wall.
Step by Step Guide on Hanging a Curtain on the Wall
The first step ever on how to hang curtains on a wall is to get the curtain materials ready. The curtain can be homemade, or you can purchase it from any local store or market.
Step #1: Take Measurements of Your Window so you can Choose Curtains
A good rule is to get curtain panels that are twice the width of your window or more extensive, so you get luxurious folds when they’re hanging and full coverage when they’re closed.
The curtain length you choose depends on how high you’ll be hanging your curtain rod and how close to the floor you prefer your curtains to be.
It is always 4to6 inches above the window frame, but to make a room feel taller, hang them closer to the ceiling up to 12 inches above the window frame.
For a clean casual look, choose a length that falls half an inch above the floor. For a more luxurious puddle effect, choose curtains that are six to eight inches longer than the rod to floor measurement.
Don’t forget the header of the curtains will factor into height measurements. Rod pockets will hang shorter than grommets or tab tops. Rod should be six to twelve inches wider than your window, so your curtains don’t cover any of your views when they’re open.
Single rods allow you to hang just a curtain or sheer panels; double rods will enable you to hang both curtain and vertical panels.
Step #2: Create Angle Template
The next step on how to hang curtains on a wall is creating an angle template. Using cardboard, create a simple right-angle template to mark your bracket spot to ensure that your rods won’t be crooked. Remember that your brackets should be four to six inches above the window frame and three to 6inches outside the frame on each side.
Save time and use this template throughout your UK home so all your curtains will be hung at the same height.
Using a pencil and your right angle template, mark your bracket spot on each side, following your rod instructions. Attach the brackets to the wall if your rod is longer than four feet; add a third bracket in the centre to avoid having your rod bow in the middle.
Step #3: Hang the Curtain
Put the rod up and place a level on the top of it too. Check that everything is even and balanced. Hang your curtains on the rod.
Step #4: Tighten the Screws
The last step on how to hang curtains on a wall tightening the screws. Centre the rod and then pull the set screws on the brackets to hold it in place. A gorgeous finishing touch to your room by hanging curtains shouldn’t be complicated.
How can I Hang a Curtain Without Drilling on my Wall?
There are many ways you can use to hang the curtain on the wall without drilling. The steps you can use include;
- The use of temporary command hooks
- Using tension rods to hang curtains
- Hanging curtains with order custom compression shades
- Using Faux Roman Shade.
- Fit and Twist curtain rods.
- Suspending curtain rods from the ceiling to avoid drilling.
Where Should you Place Curtain Brackets?
In hanging your curtain, the height at which you place the brackets matters. Both brackets should put at the size you previously chose and then about 4 to 6 inches from both sides of the window. This allowance is to give enough space to open the curtain very well.
How do I Hang Curtains on my Weak Wall?
Step #1. Use a pencil to mark the spot
Here, use a pencil or any other sharp object to mark the wall where you will hang the curtain.
Step #2: Drill
Using the drill, make a hole.
Step #3: Next, you will need to use a screw. Tighten a screw on the wall and remove it afterwards.
Step #4: inserting a Molly-bolt
Now, you should insert a molly-bolt on the hole. Molly-bolt comes with curtains, or you can buy it from anywhere.
Step #5: Add screw
Use a screw to tighten the molly-bolt. Next, fix the brackets. You should use a screw to hold the brackets firmly. Next, add finials to your curtain rod, and then put the curtain on the rod. Hang your curtain on both brackets and use screws to tighten.
That’s it. You are good to go.
I hope this write-up has helped you with how to hang curtains on a wall. If you follow the steps mentioned in this article religiously, you will see it’s straightforward.