How to hang curtains on concrete walls?
Hanging draperies, blinds without drilling holes or installing curtains onto the concrete wall can be very challenging to do.
That is especially true if you do not have the proper hardware and tools.
The installation process is very much like the drywall application.
It is challenging but attainable.
For as long as you have the suitable anchors and tools, you can complete the mounting process of the curtain brackets in a couple of minutes.
Methods To Hang Curtains On Concrete Walls
You can hang curtains by drilling the concrete walls for the hardware.
But if your rental place in the UK does not permit you to create a hole in the wall, you might also resort to the following method that does not require drilling.
Here are the methods on how to hang curtains on concrete walls:
Method #1. With drilling
Below are the steps to follow if you opt to drill curtain hardware on the concrete walls.
Step #1. Position your mounting hardware on the spot where you intend to install them
You have to measure the height of the brackets to ensure that the rod will be level.
Mark the positions of each screw hole on the wall for the mounting hardware using your pencil.
Step #2. You have to lock a carbide masonry bit into the drill
Remember that the bit must be big enough to create a hole that can securely accommodate the anchors.
Do not forget to wear your safety goggles before you start.
Step #3. Position the bit’s tip on the mark on the wall that you made in the previous step
Now hold the drill with bit positioned horizontally,
Set the drill set onto its slow speed setting and start drilling a pilot hole first.
The hole must be a bit longer than your wall anchors.
Gently tap or press the wall anchors towards the pilot hole using a hammer so that you will flush its opening onto the wall.
Repeat the same process in drilling more pilot holes and installing the remaining wall anchors.
Step #4. Finally, position the brackets.
Ensure to align all of its screw holes with the wall anchors.
Pass through the mounting screw tip into the bracket and the anchor. Then, tighten the screws.
Repeat the process to ensure that the rest of the mounting brackets are securely attached.
After you have installed all the brackets, you can already hang the curtains on the curtain rod.
Then, hang those rods onto the mounting brackets you just installed.
Method #2. Without drilling
If you are looking for a no-drill method in installing curtains, you can use a spring tension rod.
They come in an array of lengths, colours, and designs.
This type of curtain hardware is straightforward to install.
You can use it in any room from your UK house, and it will help you create an aesthetically pleasing look without the need to drill.
Below are the steps in mounting this curtain hardware.
Step #1. Measure the window area
You have to measure the area of your window first.
Take note of the measurement.
Step #2. Start measuring the length
Do this process from where you intend to mount the tension rod to where you desire your curtains to fall.
You will have to choose from three different options here.
The curtains can provide a swag treatment onto the tension rod, reach the room’s floor or fall halfway.
Step #3. Mark the spot on your wall where you intend to install the rod
That is to make sure that it will be able to conform to the design of your curtain.
Use your pencil for this.
Then, twist the middle of the tension rod to unscrew it. Continue doing so until you have fully extended it.
Slide the curtains onto the tension rod and hang it after ensuring that the rod is already secured in place.
Step #5. Raise the rod and the curtains
Do this process into their desired position at the wall. Squeeze the tension rod to the centre.
This one can trigger its spring as well as compress the rod.
As a result, it will fit snugly in place.
Step #6. Form a swag effect on the rod
Do this process by spotting its mid-point and folding the curtain in half.
Wrap the curtain around the curtain rod once and dress the fabric onto any of the rod’s ends.
You can even experiment to create more designs. For instance, you can pull the ends of the curtains gently.
Remember that the more you tug, the swag will be shorter and shorter.
Other Window-Treatments That Won’t Damage Your Walls
- Using temporary command hooks
- Hanging curtains using a tension rod
- Create Faux Roman shade
- Ordering custom-made compression shades
- Suspending the curtain rod from the room’s ceiling
- Purchasing Twist and Fit curtain rods
It’s A Wrap!
People in the United Kingdom find concrete walls attractive because it provides a modern feel to the room.
However, it makes hanging curtains a bit difficult.
Nonetheless, it would be best not to allow your concrete walls to achieve the look you want.
For as long as you have the materials and know what to do with them, it is possible to easily hang curtains on concrete walls.
That is how to hang curtains on concrete walls.