5 New Tips Of How To Hang Curtains Sliding Glass Door?

Are you curious about how to hang curtains sliding glass door?

Well, do not worry because we will give you the answer to your question.

In a while, you will be able to remove all the curiosity in your mind.

Let us be part of your path in finding things unusual for you and finding solutions to some of your problems at home in the UK.

Curtains are indeed necessary, but we do not usually put curtains along with doors.

Most of the time, it seen along with the windows.

But then how can you hang curtains on sliding glass doors?

That is quite an interesting topic so we will learn something new today.

It is incredible how your mind works to put curtains and glass doors because who might know that is a good idea.

 

how to hang curtains sliding glass door

Steps To Hang Curtains Sliding Glass Door

Some people in the UK live putting glass sliding doors on their houses, especially indoors to outdoors.

Just like how you would move from one area of your UK house to the backyard, garden or pull of your home in the UK.

Then again, you can hang curtains with it.

Sometimes, it is also placed from your room to your terrace, and indeed a wide glass door is elegant looking in one’s room.

Sit and sleep like a princess.

But then having wide glass doors would mean less privacy and more light access in your room, so better add curtains to go along.

Curtains also lift the whole interior, so you should add them to those areas that are open.

Sliding glass doors does not differ much from windows, and with that, the way you put curtains on windows will be just the same.

The only difference is that the dimensions are so much bigger than the usual size curtains you are making.

Here are steps on how to hang curtains sliding glass door:

 

Step #1. Measure your glass door

The first step here is to have your sliding glass doors measured.

Use the same process as to how you measure windows.

Grab a tape measure or a meter stick, then take the width and double the measurements by two to have a layer.

When measuring the width, add 2 – 3 inches per side to have an overhang along the sides, making sure it is well covered.

For the length, measure it 2 – 3 inches from the top frame of your glass doors and down to the floor.

Usually, glass doors have a length that is so long but is better when it touches the ground and has allowances.

It will look so much better, and that it can fully cover the length of your window, not allowing any light seen over.

 

Step #2. Cut fabric

And now you can cut your fabric only if you will be the one to make your curtains.

Remember that you can also buy.

But then there are instances where buying a curtain would not be good because it might be so short or too long.

Using your dimensions, measure and cut the fabrics you will use.

Do not forget to cut the width in the middle to have a particular effect.

 

Step #3. Sew the parts

You can then start sewing like how you sew a basic curtain.

Here is a guide for you to have the details needed.

Ensure that you follow them step by step and apply every guide, not minding the dimensions since it is different.

Sew it perfectly and take a look at those pretty curtains right after you have made it.

 

Step #4. Drill a hole and put your hook

In this next step, you will have to do upon hanging curtains on your glass doors.

Take a drill and measure about 2 – 3 inches faraway from the width and the height of your glass door frame.

Mark it with a pencil, and then you can visualize how your curtains would look hanging on that glass door.

Then drill the area where you marked earlier.

Attach a hook to the area where you drilled.

Make sure that the hook you choose will be able to hold your curtain rods later on, so choose your hooks wisely.

Step #5. Have it hanging in your rods

Insert your curtains on your rods, making sure it sits nicely, and look at the structure of the curtain on your rod.

Then place the rod on the hooks you installed earlier.

Make sure that it looks good and it sits perfectly on the window.

Try dragging the curtains and closing them again to see if it is working. And if it is, you’re all done!

 

Conclusion

And we are now done with our topic. We hope that you have learned a lot with us today.

It’s a good thing we have answered, how to hang curtains sliding glass door? at least you do not know of it.

That’s a great thing to find answers to your questions independently to end your curiosity.

Throughout the journey, we will help you, so do not worry.

how to make rod pocket curtains

5 New Ways Of How To Make Rod Pocket Curtains?

Do you know how to make rod pocket curtains? It’s effortless! All you need to do is to follow five easy steps.

Suppose you do not know how to worry less because we will help you out in this one.

You can always rely on us.

Simple curtains are pretty lovely, and sometimes people in the United Kingdom tend to buy already made curtains.

But that is not fun, especially when the fabric or style you want is not available in made curtains.

You only left with the choice of making your curtains, which sounds good because you’ll explore.

Learning new things and making them from scratch can be a good start for you upon having an interest in sewing.

Money is hard to earn now, so it is more practical if you know how to make things on your own.

That includes making beautiful and drastic curtains that have rod pockets into them to make them even better.

 

Steps To Make Rod Pocket Curtains

Making rod pocket curtains is like making an ordinary curtain, but it is more detailed.

Rod pockets are one way to make sure that your curtains will be able to hang after you sewed it and that it fits the rod.

You will need a few things, including this guide, to make it successful and have a good look.

So, how to make rod pocket curtains?

Follow the steps provided and start making your rod pocket curtains to avoid spending too much money.

 

Step #1. Gather all the materials you will need

The first thing you should do is think of the materials you will need upon making these rod pocket curtains.

You will need a fabric suitable for curtains, a marker for material like a tailor’s chalk.

Upon sewing, you will need thread, needles, pins, and of course, a sewing gauge, but this one is optional.

A measuring tape, iron, and fabric scissors are also essential for this process, ensuring that you have all of them.

But one more thing, you need patience and presence of mind to make it through.

Trust the process!

 

Step #2. Get the window dimensions

Upon getting the window dimensions, you will use your tape measure, and I have here a guide you can use.

It is crucial to get the dimensions right, or it will affect your sewing process later on.

You need to add extra measures on the width and height of the fabric so that you will add hems and it is wider than the frame.

 

Step #3. Prepare the fabric

Cut the fabric on the dimensions you decided it to be. And then you can prepare it for sewing.

Fold the ends by an inch and iron it to make it flat, easier for you to sew later on, and backstitch.

You can sew down the length with the type of stitch I mentioned earlier.

Lock the ends. Do this on both sides.

 

Step #4. The top hem

Now for your top hem, it is where your rod will fit later on.

You can use a 3-inch hem but double folded.

Fold it, and then you can iron it so that it would look even better.

Just repeat all this step over again.

 

Step #5. Completing the curtain

The last thing we do to complete the curtain is to create the pockets on top of the fabric.

You can then sew the bottom part right on the crease.

But then leave about an inch far in the end.

Hang the curtain when you finished and check on it if it already satisfies your style and design.

You can then recheck errors and go through the whole process if you think something isn’t right.

 

Our Rod Pockets Necessary In A Curtain?

Yes, of course, it is. Imagine how you would hang your curtain without those curtain rod pockets.

It is the area where you will insert your rods which can be designed as something that attaches to the fabric or sometimes a tool.

There is a way to design curtain pockets differently and will look more aesthetically pleasing.

Options are always in the corner.

You have to find one that might suit your feels.

But this one is just simple and easy to do.

There are more complicated and broad ways of doing this.

This one is good for starters and those who do not know a lot about sewing or curtains.

Do not worry because you had the idea right after reading all the steps we gave you earlier.

You can research for more or check out blogs like where you have seen this article.

We have a lot of topics and questions that have answers to them, including questions about curtains.

If you want to dig in and know more about these things, check us out, and you will see more.

And that is how you make rod pockets for your curtains.

Conclusion

We now finished with our article.

I hope you have learned a lot, especially about “How to make rod pocket curtains?”

It is not easy to start from scratch, but it is always better to try and learn than to sit there confused.

How to make bead curtains

How To Make Bead Curtains In 4 New Steps?

One fantastic thing about bead curtains is the artistry beauty it adds to your apartments or home in the United Kingdom. Bead curtains mean cutting out beads and inserting the beads in a string that you tie to the curtain rod.

Before making a bead curtain, make sure your curtain rod and strings are strong – as beaded curtains can get heavy when hanged.

Bead curtains are expensive to purchase but are very easy to make. Discussed below is a step-by-step approach on how to make bead curtains; make sure you read to the end for you to understand the simple method involved in the whole process.

Easy Steps on How to Make Bead Curtains

For you to get an idea of how many beads needed for your project, note the following

  • Measure the opening (door/window) dimension, where you will hang the curtain on, knowing how extensive your bead curtain needs to be.
  • Get a measuring tape for the measurement.
  • Get a solid string to be used in tying the beads
  • Get a strong rod – preferably wood, as the beaded curtain can get heavy when hanged.
  • Buy a bead in different sizes, shapes, and colours to add more artistry beauty to your UK apartment.

You can choose from what materials the bead is and, amazingly, get a customised type.

Step #1: Measure the Window/Door you Plan on Putting the Curtain on

This step involves the measurement of the length of the window. Use your measuring tape to measure the two sizes of the window or door. The size is essential to give you an idea of the number of beads you will use.

Add about 6-12 inches to the length you measured. The reason for this is to extend the rod past the window or door.

If you’d like your beaded curtain to be inside the window/door, measure within the window frames (inside the rim of the window), from top to bottom, and from the right end to the left end.

Make sure you don’t add any extra measurement as it is within the frames of the window/door.

Step #2: Cut out a Wooden rod With a large Diameter. According to the Measurement Taken

The use of solid and sturdy wood – like oak, is always advised. Because these beaded curtains get heavy after tying to the string, avoid using tension rods, as they won’t be strong enough.

Note; you can provide the wooden rod yourself with a saw; better still, walk into a furniture store and buy. If you have a metal rod that can hold up this bead curtain, make use of it.

 Step #3: Tie the Hooks to the Wooden rod

In this process, attach the hook into the rod by drilling holes into the wooden rod to firmly attach the wooden rod’s hooks. To know the number of hooks to be used in this article, how to make bead curtains will depend on how wide your window or door is.

The larger the frames of your window, the more hooks you will be needing. If you mount the beaded curtain inside your window/door, drill the holes into the frame itself.

Step #4: Get Some Beads and Insert Them Into the String

Upon completing this step, the process involved in “how to make bead curtains” is done. Take the beads gotten, and insert them into the string one after the other.

After inserting a particular bead into the string, tie the string’s tip to create a lump on the bead’s head. You do this to avoid the uneven arrangement of the beads in the string.

Repeat this process till you get to the top of the string, so after hanging, you will get the desired length you want, from the top of the placed wooden rod towards the ground. Note that if you are using coloured string, consider using clear beads for an excellent effect.

After tying the beads to the required number of strings that will be enough, use the string’s head tip to connect to the wooden rod above the frames of the window/door and allow it down. You just learned the easy and simple ways to make bead curtains, and here are additional keywords for you.

How can I Make Bead Curtains?

The steps listed above on how to make bead curtains perfectly answer this question. It is effortless to make if you understand the processes in the steps above.

How Many Beads can I use?

A minimum of 267 bids is required. In general, the number of beads to be used depends on the length and size of your window/door.

Are Bead Curtains Old Style?

You might think that bead curtains are old-fashioned, but the simple answer to this is no!. Because bead curtains play a significant artistry role here by beautifying the environment. Most restaurants, shops use bead curtains, and what does that imply? a sought-after curtain style.

What Type of Rods are Used for Bead Curtains?

The type of rods used for bead curtains is solid and sturdy rods to hold the heavy beads. Most rods used are – metal or wooden rods.

Conclusion

The steps on how to make bead curtains extensively explained, and a clear understanding of these steps, teaches you how to make bead curtains yourself.

how to make tab top curtains

6 New Steps Of How To Make Tab Top Curtains?

Different styles of curtains create other dramatic effects in your overall interior UK design. From pocket rod curtains to back tab and now tab top curtains. Using a few common materials, you can revamp your curtain’s look by learning how to make tab top curtains. 

 

Adding a bit of fabric is an excellent way to change your drapery’s aesthetic appeal. Give your UK living room, bedroom, or kitchen a new style in a few simple steps. Brush up on those cutting and measuring skills and add your tabs to your regular curtains

Step 1: Gather your materials

Transform your regular curtains into a casual and stylish tab top curtain using just a few common materials. All you need is your fabric, sewing pins, thread, ruler, scissors, needle, and sewing machine. If you don’t have a sewing machine, a simple hand needle and thread will do the trick. 

Tip: Choose your fabric wisely. 

Since we’re doing a tab top curtain, it’s important to note that the tabs are visible since you are attaching them at the top part of your curtain. Try to choose a fabric that matches or at least complements the curtain.

 

You can use an old regular curtain and some fabric to turn your old drapery into a modern window treatment. Or you can create your customised curtain using some fabric and sewing materials and learn how to make tab top curtains from scratch. 

Step 2: Make the necessary window measurements

If you’re going to customise your curtain, you need to know the exact measurements that will enable you to cover the entire window. Get your measuring tape and note the window’s width, length, and height from the ground. 

 

Decide on your curtain’s preferred length. You can let it fall just a few inches below the window’s edge or let it hover an inch or two above the ground. Use your tape measure to determine the exact length of the entire curtain.

Step 3: Note the curtain dimensions

If you want your curtains that appear loosely gathered while it is closed, add extra inches to the fabric you will use. Using the exact width of your window for your curtains will result in a stiff cover.

 

Determine first the required dimensions of your curtain, including the tab top. For instance, if you’re going to need a 108-inch curtain for it to hover precisely an inch above the floor, that 108-inch height should include tab tops, not only the curtain itself. 

Step 4: Determine the tab’s dimensions

Your tab’s length and width should be consistent throughout. You can choose longer or shorter tabs to attach to your curtain. If you prefer a tab that adds 3 inches to the curtain, deduct those 3 inches from the original measurement. 

 

For example, if you need a 108-inch long curtain panel and a 3-inch extended tab, your curtain panel’s height will be 105 inches. 

Step 5: Cut the fabric

A curtain requires three primary pieces: the main panels, curtain facing, and tabs. The main panels refer to the curtain’s dimension without the tab’s length. The length one should determine after following the procedures in step four. 

 

Add six extra inches in the length and width for the hemming. You can make as many panels for your windows as you wish. But two panels should be able to cover one window. Use the curtain’s width that you took note of in step three.

 

Cut out your tabs using the dimensions determined in step four. Remember to multiply it by two since you will be folding it to hang your curtain correctly. For example, a 3-inch extended tab one should make from a 6-inch strip. Cut as many tabs as you need for each panel. 

 

Create the two pieces of curtain facing by cutting out a strip from the fabric with the same width as your curtain panel. Make it three inches tall. 

Step 6: Sewing

Start by sewing the tabs. Fold each tab in half in a crosswise direction. You can iron it so that it holds its shape. Pin the sides in place and use a sewing machine or needle to stitch along the edges of the fabric. Use a half-inch seam allowance. Repeat this for all your tabs.

 

Hem the side seams of your curtain panel. You can also iron them to make the stitching process easier. Sew the hem at a three-quarter-inch seam allowance. Do this for all sides except the top seam. Determine the placement of your tabs in each panel, and sew them in place.

 

Sew the facing of your curtain at the top seam and lay right side down over the curtain top. Sew the top edge with a half-inch seam allowance. Iron the fabric to define the folds and creases. Make the finishing touches by securing the tabs in place.

 

Hem the lower part of your curtain and press the iron to give it a crisp finish. 

Summary

It may be a lengthy process, but learning how to make tab top curtains from scratch is a fantastic way to brush up on those creative and sewing skills. Choose medium-weight materials for better handling, and try to consider the colour of your curtain. 

 

It’s crucial to establish precise measurements and dimensions before cutting the fabric. Otherwise, you might have to repeat the entire process. Secure your tabs in place, and don’t forget to do a topstitch.

 

how much fabric do I need for curtains

How Much Fabric Do I Need For Curtains With 3 New Tips?

Do you wonder of “how much fabric do I need for curtains?”

Well, a curtain should be one and a half up to two times the width of the area it will be covering.

It is a simple rule of thumb, but there is also some factor that you must watch out for like the weight of the fabric.

If you have a heavy type of curtain fabric, you can rest assured of the fullness that it can offer compared to the lighter ones.

The lighter it is, the more fullness is required, which is why you need to choose wisely.

In this article, we will be discussing some tips on “how much fabric do you need for curtains?”

So, without any more delays, let us get right into it!

 

Steps On How To Measure Fabric For Curtains

Curtains that you can buy from the stores maybe will cost you much for just a curtain.

But come to think that sewing curtains are easy even for beginners.

If you want to have a customised drapery, you must know how to measure the right amount of fabric you’ll need.

Here are the steps that you may take:

 

Step #1. Take correct measurements

So, how much fabric do I need for curtains?

It is undeniable that not all windows measure the same size.

There is no standard size for it, so you have to measure its length and manually.

You can use metal tape to measure from one side to the other (width) and from top to bottom (length).

 

Step #2. Estimate the length of your curtain

As per step number one, you now have the length of your window.

Of course, you do not want the drape’s size to be as long as the window only.

The next thing that you can do is add a few more inches to have your preferred length for the curtain.

Adding inches will let you have an allowance for the styling you prefer.

If you want to make it at floor level, you must measure the window’s distance to the floor.

 

Step #3. Determine the width

If you are to install a rod inside the window, you also need to add its width.

It is necessary to use the fabric that you will be using won’t fall short or too narrow for the desired area to be covered.

 

Step #4. Prepare extra fabric

Some people in the United Kingdom want to have headers and hems on their drapes, so having some extra sheets won’t hurt.

If you do not want to put styles, refer to your measured final length and width.

 

How Much Fabric Do You Need For Curtains?

There are factors that you have to bear in mind when getting a fabric to cover your window.

Here are the following:

 

Tip #1. Size

We are all aiming for great aesthetics when it comes to our UK home, am I correct?

The proper measurements of the length and width should be something you must have.

Either you will have it customised or store-bought, make sure that you have these vital measurements.

Through this, you won’t be disappointed when you install it.

 

Tip #2. Fabric

Since you have the correct length and width, the next thing that you should look at is the fabric.

It because every material has characteristics that have varied effects.

If you seek a drape that will be sunnier or lighter, then linen and burlap are some examples of fabric you might want to buy.

You must need heavy fabric for a darker room effect since it entails a fuller look and feel.

Warp and antique satins are some options that you can have.

 

Tip #3. Colour

The colour of the drape will indeed offer you advantages and disadvantages, so it is also a crucial decision for you.

Some colours will make your room darker, and others will make it smaller in appearance.

If you want a stand-out curtain, you should choose a color that is entirely different from the color of the wall.

For a blend-in style, make sure that the curtain’s tone is similar to the wall so that you can achieve the result you want.

 

Can You Use Any Fabric For Curtains?

There are different types of fabric that you can select from when it comes to curtains.

There are cotton, linen, wool, nylon, silk, and polyester.

Depending on your style and preference, you can have any fabric that goes with your budget.

Some may be affordable, but of course, you must not settle for less because it is your UK home that you will be decorating.

Conclusion

You have to consider your needs if you are to customise or buy a drape for your window.

The factors are something that you need to keep in mind before anything.

These kinds of fabric and color may come second since you need first to make sure the window size is covered.

Measuring it precisely and accurately will always give you the best results that you and your family will be happy with the outcome.

I hope you learned a lot through this article, and good luck in measuring your drapes’ right length and width!

Thank you very much for reading about how much fabric do I need for curtains.

How to Hang Curtains From Drop Ceiling

How To Hang Curtains From Drop Ceiling In 3 New Steps?

Drop ceilings are ceilings installed artificially, a few inches away from the existing ceiling. Most people in the United Kingdom do not want the existing ceiling due to its old look, or the ceiling doesn’t attract nor beautify the room. In this article, you will learn how to hang curtains from drop ceiling.

The importance of drop ceilings allows access to the wires connected in the apartment and welcomes the screw-less installation of curtains.

If you’d want to hang your curtain without a screw or nail/knot, you should consider the application of a drop ceiling. This write-up focuses on how to hang curtains from drop ceiling. 

Easy Steps on Hanging Curtains From Drop Ceiling

Before discussing the steps involved in hanging the curtain from the drop ceiling (suspended ceiling), we will pay attention to the following materials provided for this project.

  • Measuring tape –To measure the length from one end of the wall to the other end and between the fixed tiles to know the number of curtain clamps to be attached to the drop ceiling
  • Hooks
  • Screwdrivers – For tightening of screws where necessary
  • Curtains
  • Curtain clamps
  • Curtain track
  • Curtain track ceiling cartridge.

Step #1: Measure the Length of the Drop Ceiling 

The first step on how to hang curtains from drop ceiling is measurement. Use the measuring tape, measure the length of the wall, and note. After noting, measure the size of the drop ceiling tiles (vertically and horizontally), note the reading also.

This process allows you to know the number of clamps and drop ceiling cartridges that you will use and the amount of space needed far apart from each other. For this tutorial, the standard spacing of the clamps from each other should be 10 inches.

Step #2: Attach the Clamp in the Drop Ceiling Cartridge

The second step on how to hang curtains from drop ceiling is attaching the clamp. Attachment entails attaching the curtain clamps in the drop ceiling cartridge. The curtain clamp is attached to align with the cartridges of the drop ceiling.

To do this, use your screw, loosen the cartridge a bit, and then fix the clamp to align in the right direction to the cartridge, then use the screw to tighten the cartridge to be held firm with the clamp.

However, the clamp enables easy fixing of the curtain hooks. So, if you’d prefer to install your curtain screw-less, here is a perfect solution to it.

Step #3: Fix the Curtain Hook and Hang the Curtain

The last step on how to hang curtain from drop ceiling is installing the curtain in your drop ceiling. To do this, take your curtain hook and fix it over the curtain clamp. You may decide to add hangers to beautify the room.

In fixing the curtain on the drop ceiling, you should ignore the use of a curtain rod. The drop ceiling’s frames give no room for attaching the rod.

Use your curtain (pinched) and roll over the curtain hook, then allow the curtain to fall towards the ground.

Pinch the curtain again and roll over the second hook such that the curtain is allowed to drape in a U-shape between the clamps installed to the drop ceiling, to the direction you’d like your curtain to be. 

However, this type of curtain installation only makes your curtain in the format of a drape scarf curtain, as such adds beauty to your room. You may wish to install your curtains with hangers only.

To do so, fix the curtain to its hanger and hang the hanger on the hooks earlier installed, as these are the simple steps involved in hanging curtains in a drop ceiling. For these tutorials, more keywords have been provided below for your understanding.

 

What Weight Can you Hang on a Drop Ceiling?

First, it is not advisable to hang heavy curtains on drop ceiling. Precaution is because the drop ceiling will only contain a certain amount of weight. The standard and average weight to hang a drop ceiling shouldn’t be weighing more than 16plb as you avoid pulling the drop ceiling when the load becomes too much.

Can you Hang Curtains With a Low Ceiling?

The answer is yes!. To do this, fix the curtain rod above the window frame at the end of the wall. This process makes the wall look taller after you install the curtain.

 

How to Hang Curtains on the Tiled Ceiling?

The process of hanging a curtain on a tiled ceiling is the same as the steps listed above. It becomes easier to install when you understand the steps well.

Is the Drop Ceiling Hard to Install?

Following the steps above on how to hang curtains from drop ceiling, you will discover that it is easy to install a curtain on the drop ceiling. But is it hard to install the drop ceiling itself? The simple answer is no.

Conclusion

I believe in this, and you have learnt how to hang curtains from drop ceilings. The steps explained are simple and easy. Make sure you understand the steps before practising.

[mailpoet_form id=”2″]