For any reason you don’t want to use a curtain rod, it could be because you are trying to show off that you have some eclectic style and curtain rods don’t fit your style and still create good curtain decor. This article will show you how to hang curtains without curtain rods.
However, there are no strict rules that you must use. So to be creative in your designs, you may choose not to follow the traditional rules. As a result, you would get a new and unique result for your window treatment installation.
Below are some of the options you can choose from when looking for methods of how to hang curtains without curtain rods:
- Upholstery tacks
- Cabinet knobs
- Hook-eye screws and drapery pins
- Tension cables
- Staples and furring strips
Upholstery Tacks
Using curtains doesn’t necessarily have more functions than adding colour and finishing to your room. So if you are not to open your curtains or prefer curtains drawn using curtain tie-backs, then use upholstery tacks that are easy and cheap to get.
Steps on how to Hang Curtains Without Curtain rods Using Upholstery Tacks
You would need;
- Upholstery tacks
- Tape measure
Step #1: Buy upholstery tacks following a coordinating finish.
Step #2: Test the number and size of wrinkles required to ensure you have a well-positioned curtain panel that will cover your window correctly.
Step #3: Start by inserting the first upholstery tacks into your curtain at the corner on the outside edge of your window’s opening.
Step #4: Then, use some fabric to create a crease, tack it into the curtain wall up to three inches from the first.
Step #5: Repeat the process throughout the window. And that’s it!
A Tension Cable
A tension cable is another method of how to hang curtains without curtain rods. It can work with any particular type: rod pocket, tab top, or ring clip.
It is ideal for hanging sheer and lightweight curtains and can function as dividers for your room for a row of lengthy windows.
Step 1: You need to get these materials;
- Two turnbuckles,
- Two-wire clamps,
- Two wall hooks,
- Plastic-coated wire cable (buy up to 1-1/2 to 2 feet extra cable than required because it’s better longer than too short.)
- Screws
- Anchors that fixes the hooks into the wall
Step #2: Start by screwing in the hooks to the wall, each window opening sides.
Step #3: Make 5 to 7-inch loops at the cable ends, then secure them using wire clamps. Get your measurement using tape or any other measuring material.
Step #4: Insert the wire into the curtain’s grommets or tabs.
Step #5: Fasten the turnbuckles’ ends to the tension cables and hooks.
Step #6: Cut off the excess cable wire and fasten the turnbuckles so that you can create the correct tension.
Step #7: Using the hook clips for the wire cables, hang them to fix the curtain.
Hook-Eye Screws and Drapery Pins
If you like to give your pleated a formal hook and don’t want to install a curtain rod, hook eye screws would be perfect.
You would need;
- Drapery pins
- Pins
- Pencil
- Eye hooks
Step #1: Insert drapery pins through your curtain panel top.
Step #2: Measure your curtain width at the top and record the distance between the pins.
Step #3: Note the pin’s position on top of your window using a pencil.
Step #4: Fasten in eye hooks at the point where you marked with your pencil. Let the eyepoint horizontally so that it will take in the drapery pin.
Step #5: Insert the pointed drapery pins into the centre of the wrinkles.
Step #6: Put the drapery pins inside the eye screws and install them to the wall with several inches intervals.
Staples and Furring Strips
Using furring strips and staples is one way to hang curtains without curtain rods, especially for stationary curtains. Furring strips are long light plywood that we popularly used to construct applications.
You would need:
- Furring strips
- Paint
- Screws
- Nail
- Staples
- Tape measure
Step #1: Measure your windows.
Step #2: Buy the accurate length of furring strips you would need for your windows.
Step #3: Paint your furring strips the colour of the wall.
Step #4: You can screw or nail these furring strips to the wall studs so that you can secure the installation.
Step #5: Use staples to fix the curtain panels to the furring strip while stapling the pleats.
Step #6: You will hang the curtain non-functional panels using stapling pins on the furring strips.
Conclusion
The best in “how to hang curtains without curtain rods” is using the available options above.
Instead of curtain rods, including the materials you would use, get the available materials needed to hang your curtain without a curtain rod in the local store near you.
They are pretty cheap too and give your room a beautiful look. It adds style to your UK house at an affordable cost without much hassle.