How to hang pleated curtains? You may ask. Well, keep on reading to find out how.
To hang a pleated curtain, you would need a measuring tape, pencil, a rod, and a ladder to accomplish the task.
The task would be the same as hanging standard curtains.
Regardless, read on to find the complete detail.
Steps To Hang Pleated Curtains
How to hang pleated curtains?
These pleated curtains are the ones the look like is pinned together, which appear elegant, placed with floor-length drapes, or with a valance.
Step #1. Wash and dry curtains
Some designers get bored with a simple curtain in a room. It is best when levelled up.
In that way, you will have a better and lovely room, giving you more reason to stay there.
You can wash your curtains as the first step.
Make sure you know how to clean curtains properly.
You must take care of the fabrics of your curtains properly.
Proper handling of curtains is a must.
Using a mild fabric conditioner can be good.
Also, upon drying the curtains, observe proper caution.
And then you can iron your curtains after you dry them up.
Step #2. Measure the length
The next thing you will do is to measure the length of your curtains.
Then diminish about 3 / 8 of an inch.
And then do determine the area where you prefer the hem of your curtains to be aligned.
The ladder is needed, especially when your window is high from your marking at the bottom measure until the top part.
You can use the pencil to mark it to make it easier for you to identify later on.
You will mount your brackets later on, so this is important to mark and align correctly.
Step #3. Mounting the bracket
Using the pencil mark, align your bracket.
Make sure your bracket is in place so that it will face upfront.
Using another hand, use a pencil to mark screw holes.
Both hands must be working for your work to be more accessible.
Using your drill, have that bit about 1 / 8 – inch as your tool in drilling those holes you made with pencil marks.
After that, change the bit you are using, which for drill into a bit screw.
Then right on your holes, reset your mounting brackets.
After that, you can drive in the screws for mounting.
Step #4. Continuing step 3
After that, carry the ladder in the middle of your window.
And connect your rod to the bracket you mounted earlier.
But then not only on one end but the bracket on the other side even when it is unmounted.
You can use a level tool or look with your eyes at which area it will balance.
After that, repeat and follow step #3.
Step #5. Inserting pins
Determine the center of your pleat, then have your drapery pins inserted right in there.
It will help secure your rod by hooking on it.
Hide the pins by sliding them below your pleats’ stitches, causing the hooks to be the only thing visible.
A UK manufacturer of curtains, says Castec, and a curtain mounted right in the ceiling has restrictions to follow.
These curtains must be one ¼ inch from your drape on top when pinned.
On the other hand, those drapes mounted in the wall must be 1 3/ 4 inches from the top when pinned.
Step #6. Hooking the rod
You can now hook your first pin on your rods.
Rods traverse foes have a carrier slide (master), which is more significant than others.
But sometimes, it is also the colour that differs.
These master slides are your key to operating your curtains—that when you open from the middle of the sides.
When you are hanging the curtains, it will open outward, coming from the center.
You can start inserting the curtains in the panel on your left.
In which consider the furthest hook right to the slide.
You can start working on the centre of your window going out.
It should support the weight of your curtains.
That is for the reason that the pins won’t slide down.
Keep repeating this throughout the panels.
Step #7. Pleats
You can break your pleats. It is usually created and form in ruffles using plastic in between them.
The next thing you should do is open your curtains all out, pinch your material that is stiff right in the head.
It will create folds that are protruding.
Right then, you can close the curtains.
But if you want to test those wrinkles, you can reopen them.
When making pleats will require lots of time in folding, hemming, and more things.
As you think, it looks are deceiving.
It might look elegant and simple designed.
But then it is very complicated, a good thing you have this modern way of putting it up, curtain-making process.
Conclusion
And we are now done with the article. We are hoping that you have learned a lot with us today!
Good thing we have answered, “How to hang pleated curtains?” you have a piece of new unlocked knowledge.