Do you want to know how to insulate an existing metal building? If not, then you’re just in the right place; I’ll teach you how in three straightforward methods- by a radiant barrier, spray foam, and fibreglass sheet.
Indeed, if you have a detached garage at the UK home, it doesn’t usually come with insulation.
Some regions in the UK don’t require insulation.
But, here are just some of the reasons why you should do so:
Why Should You Insulate A Metal Building?
First, it ensures comfort while you’re inside the building.
If your place has a high humidity level, it can help reduce the accumulation of moisture below the roof; that means the things inside the building will less likely become damp.
Of course, you should also expect that insulation comes with significant drawbacks; and one of which is “it’s not FIRE RESISTANT!”
So, the best thing to do is to take precautionary measures, especially if there are combustible or flammable items inside your metal building.
Take note of this:
The metal building itself is naturally resistant-from fire; adding insulation changes that, though.
Without further ado, let’s get into details on how to insulate an existing metal building.
Methods Of Insulating An Existing Metal Building
In this article, we’ll teach you three of the primary methods of how you can insulate your existing metal building.
Here are the following:
Method #1. Install radiant barrier insulation
UK builders typically install this kind of insulation while constructing the structure.
So, what does that mean? Can you still use this method if you already have a metal building?
Here’s the thing:
This insulation is placed on the building’s exterior panels found between the support beams and the panels.
It only means that you can use the method, though you still need to execute minor repairs.
Here’s how one does install radiant barrier insulation:
Step #1. Placing the double-sided tape in the frame’s studs
After constructing the building frame, put the double-sided tape on its studs (from the top to the foundation).
Step #2. Attaching the insulation
Now that there’s a double-sided tape attached to the studs, you can now put the insulation roll therein.
Do not forget to tape the scrim of the insulation together on the white side.
Step #3. Finishing touches
Now, you’re in the final step!
It’s time to put the wall panels and screw them through all the layers into the building’s frame.
Method #2. Install spray foam insulation
Perhaps, the significant advantage of this insulation is that it doesn’t hold any moisture; there’s no way the things inside your building will get damp.
It’s the best option if you’re living in colder climates.
Why so?
It can, of course, insulate your building, allowing heat to trap therein.
Aside from that, it gives protection against drafts and insects.
More amazingly, it’s quick to install; and here are the steps on how to do it:
Step #1. Distribute the insulation
Get a pressurised device, and use it in distributing the insulation uniformly.
Warning!
It will be challenging to remove the foam once it hardens. So, you better avoid accidental spills.
Step #2. Focus on necessary areas
Aside from the uniform distribution of foam, you also need to check on critical areas- between the studs.
Ensure that they are entirely covered (you will know that this process is complied with if it gives you optimum insulation).
Step #3. Wait
Now, it’s time for you to wait. Just be patient, okay?
Once the foam dries, you can hang the wall sheeting inside.
As easy as that!
Method #3. Install fibreglass insulation
UK experts say that they do not suggest this kind of method for your metal garage.
Here’s the main reason why:
It’s prone to moisture, and there are some issues regarding the stud’s spacing.
Anyway, you still have to know what insulation this is.
The typical width of a rolled fibreglass is from 15 to 24 inches.
It only shows that it’s ideal to use in wood framing studs, mainly for residential housing.
Most of the time, the frame of metal garages comes with 4 feet to 5 feet studs.
Given the added distance, you have to leave the rest for the tape.
And when one uses the tape for insulation, it’s prone to peels, leaving gaps therein.
In addition to the above said, fibreglass rolls are known for holding and collecting moisture, so your building will be prone to moulds.
Anyway, installing the fibreglass sheet is the same as installing the radiant barrier insulation.
Conclusion
If you have a detached garage or an existing metal building in the UK, it’s a good idea to install insulation.
You’ve already known the reasons why you should. It can trap heat inside your building, helpful, especially in the UK cold seasons.
Anyway, either of the three methods is excellent to use; the rest depends on your discretion.
Well, anyway, each method comes with pros and cons. Whatever you think is best for your building, go for it!
Hopefully, you’ve learned the methods on how to insulate an existing metal building.
Have a great day!