How To Loom Knit A Blanket On Round Loom Easy?

You can learn how to loom knit a blanket on round loom in two easy steps. We have discovered the best beginner-friendly method to make a blanket on a round loom. Before you knew it, you have finished a Baby afghan blanket!

 

How To Loom Knit A Blanket On Round Loom

How To Loom Knit A Blanket On Round Loom For Beginners

 

1. Knit four panels

To start your blanket on a round loom, you have to knit four panels with an e-wrap stitch. You can use different colours of yarns, depending on the pattern of afghan you want to make. If you’re using a round loom with 31 pegs, you will knit all four panels by alternating between 48 and 10 rows for every yarn colour. 

For example, your first panel can be a specific colour of yarn for 48 rows, followed by another colour for ten rows, and so on. You’ll do this until the fourth panel to achieve the blanket design you want. It will be 48 rows, ten rows, 48 rows, ten rows, 48 rows, ten rows, and 48 rows of yarns’ different or alternating colours. 

 

2. Connect the panels and finish

Once you’ve finished the panels, you can connect them with a mattress stitch to construct your blanket. Start with the first and second panels on a flat surface facing up and line the same colours with a mattress stitch. Take the same yarn colour and thread it through your needle and sew through the loops on either edge of the two panels side by side. 

Once you’ve closed the gap, pull tightly, knot, and weave the ends to the panels for a neater finish. You’ll also be using half an inch of polyester ribbon to sew over the seam. Remember that you must sew two ribbon strands in the opposite direction every fifth row of knitting to make a bow on each row end. 

 

Can You Make A Blanket With A Circle Loom?

You can use a circle loom to make a blanket using e-wrap stitches, as seen in the two-step method above. Another helpful tip to remember when loom knitting a regular-size blanket on a round loom is to knit, purl, knit, and purl the first rows to keep your project’s edges from rolling. In general, you can knit as many panels as you want to achieve the blanket size you need as long as the circle loom allows. 

Overall, circular knitting is best for doing tubular projects. However, you can still do a flat project like a blanket on a round loom by working back and forth on the pegs instead of following the circular frame of pegs. 

 

How Do You Finish A Blanket On A Round Loom?

Finishing off a blanket or a flat panel from a round loom is similar to what you’ll do on a flat loom. However, it would be best if you considered what edge you want to have on the blanket or whether you want it with a stretch or not. To help you understand binding off as a beginner, here are the basics you can remember. 

 

Basic bind off technique

You want to work the first two stitches as you normally would and move the second peg loop to the first. Loop the bottom over the top and the peg, move this new loop from the first to the second peg, and repeat. Make your third stitch and move the loop from the third peg to the second peg. 

You’ll also pull the bottom loop over the top loop and peg and move the new loop from the second peg to the third peg. Did you get the main idea of binding off? You’ll repeat this technique until you finished binding off all the stitches.

 

What Can I Knit With A Round Loom?

Compared to rectangular looms, round looms are more versatile because you can knit in a circle or use the loom to knit flat panels. The round loom will hold all the stitches for you, and you’ll wrap the yarn around the pegs ad pull the bottom loop over the top loop. Keeping this method in mind, the projects you can do with a round loom is extensive. 

If you use a large round loom, you can make blankets, cowls, hats, or any project that uses a large pattern. Alternatively, a smaller loom is more comfortable for narrower and smaller projects like socks, gloves, or baby items like hats. There are many patterns for round looms online, so be sure to practice!

 

How Do You Loom Knit A Blanket?

You can make a blanket on a rectangular or round loom. The most common way is with the former, and you can simplify the process by casting on the first peg with a slip knot. Then, you’ll make a stockinette stitch to work the yarn across the rectangular loom to reach the blanket length you want. 

Once done, bind off the project with a knitting hook on both ends to ensure that your blanket edge will be durable.  

Conclusion

Tubular projects like socks are not the only ones you can do on a round loom. To summarize our guide on how to loom knit a blanket on round loom, you’ll knit four panels and connect them with a mattress stitch. Remember also to learn the proper way to bind off on a round loom, and you’ll finish with your blanket in no time!

how to block a baby blanket

How To Block A Baby Blanket In Knitting Professionally?

Wet blocking is one of the best ways on how to block a baby blanket in knitting. This method is best for wool, cotton, and other sturdy fibres. 

 

What exactly is blocking? It may sound a little extreme, but it’s a simple process that doesn’t require many materials.

 

There are different methods to match the variety of fabrics out there. This guide will help you improve your knitting prowess.

 

Learn all tricks to make your baby blanket a work of art! 

 

Why Is Learning How To Block A Baby Blanket Necessary?

Have you ever looked at your knitted blanket and thought, “this is not what I want it to look like”?

 

It’s all crumpled up and wrinkled, no matter how much effort you put into it. How can you make it look better? 

 

That is when blocking comes in. It is the “final” process of knitting, and it uses different techniques to make your work look more attractive and smooth.

 

It can even make stitching easier for you. 

 

Blocking may not be necessary for some pieces, but if you’re aiming for beautiful creations, then this process is worth your time. A neat and clean blanket is an excellent gift for your little one! 

 

The Different Blocking Methods

It is common knowledge that there are different knitting fabrics like wool or silk. However, can they all be blocked the same way? 

 

There are different methods you can use for fabrics with varying levels of strength. Here are the three most common blocking techniques. 

 

Wet blocking

As the name suggests, this type of blocking involves soaking the blanket in cool water. You may add some wool wash to the mixture since it will help relax and soften your yarn. 

 

This method is best for wool, cotton, and other sturdy fabrics. 

 

Steam blocking

You pin the fabric on a clean bath towel and hold a steam iron over it. Make sure the iron will not touch your blanket. 

 

The heat from the steam will make the fibres of your piece relax. It will be easier to adjust and shape. 

 

Steam blocking is gentler than wet blocking, so this is best for highly textured fabric like felt or lace. You may also block cotton this way if it meets your preference. 

 

Spritz or dry blocking

This method is best for delicate fabrics like silk or alpaca wool. You can pin it on a blocking board, spray it with a bit of water, and leave it to dry. 

 

This technique is an excellent alternative method if you are not comfortable with completely submerging or steaming your work. 

 

So, which is the best for you? 

 

What Materials Do You Need To Block A Baby Blanket?

The materials you need depend on the type of blocking method you will use. The primary materials you need for wet blocking are a basin, a filter, and an old towel. 

 

Additional materials that may help are blocking mats and T-pins.  They will give you the best results, but don’t panic if you don’t have any. 

 

How To Block A Knitted Baby Blanket

Baby blankets usually made of cotton. You can condition this material through wet blocking. Here are the steps. 

 

Step-By-Step Process How To Wet Block A Baby Blanket

Cotton is a sturdy fabric, so don’t worry about soaking it in water for a long time. Just remember to follow the steps. 

 

Step #1. Finish weaving the ends on the back of your blanket

If you are soaking a piece that you want to sew together, then leave the ends loose at the cast-off points

 

Step #2. Soak the blanket in cold water for twenty-minute

Make sure all parts are submerged. You may use your hands to push the knitting under the water.

 

Step #3. Drain the water from the blanket

.Transfer it to a strainer or large colander. Let it drain for a few minutes, and do not twist or wring the blanket.

 

Step #4. Transfer the blanket to a towel to soak up excess water

Use a towel that has a similar colour to your yarn to avoid the colour leaking.

 

Step #5. Set up your blocking mats

Place them on a water-resistant floor or craft table. Could you not set it up on a hardwood floor?

 

Step #6. Spread the blanket on the mat and adjust the knitting as needed

Take your time in this process and look out for stretchy yarn.

 

Step #7. Pin the edges

You may use T-pins or other blocking pins. Keep in mind that they should be rust-resistant.

 

Step #8. Let the blanket dry

It will dry for 1 to 4 days, depending on air temperature and yarn quality. You may put a fan to help the process.

 

When all this finished, you can give the blanket to your little one!

Conclusion

That wasn’t so hard now, was it? Your creations will all be precise and clean when you learn how to block a baby blanket the right way.

 

Just think about which method works best for you, considering the material and the size of your piece. 

 

You will make beautiful creations that your loved ones in the UK will appreciate. Isn’t that great?

[mailpoet_form id=”2″]