How To Make A Sweatshirt Blanket? 6 Special Steps!

If you are putting together old sweatshirts that have piled up through the years, is how to make a sweatshirt blanket. It’s a unique and budget-friendly gift for a loved one that may be graduating or even for yourself!

Isn’t it difficult, though? Don’t you need to put quilt stuffing inside? The best thing about using sweatshirts, compared to T-shirts, is that they are already thick, so you don’t have to make it into a quilt to be warm. It is much simpler to make!

 

how to make a sweatshirt blanket

Why Is A Sweatshirt Blanket A Good Idea? 

Everyone has a collection of sentimental sweaters hanging in their closet. You barely use them, but you would never think of throwing them away, either. 

What can you do then? Why not try upcycling them? The part of the sweatshirt that matters is the logo anyways, so why not put them together in a beautiful cloth collage?

A sweatshirt blanket is an excellent idea to save space in your closet while you still keep the sentimental value of the material.

 

How Many Sweatshirts Do You Need To Make A Blanket?

It depends on how significant you want to make your blanket, but a safe number is twelve sweatshirts or twelve “patches.” 

If you only have six hoodies, then you may cut the front with the logo and the back that is just plain cloth. 

A standard sweatshirt blanket is 52 x 77 inches. The preparation time is one hour while the active time is two hours, giving you three hours to finish the whole project.

That isn’t too bad.

 

Materials You Need To Make Your Blanket

Now that you know all the uses and benefits of a sweatshirt blanket, it’s time to get your materials ready. Here is what you need:

 

  • Your sweatshirts
  • Two yards of Sweatshirt fleece that should be around 60 inches wide
  • Fifteen and a half-inch square ruler
  • Your sewing machine
  • A rotary cutter
  • A cutting mat
  • A quilting ruler

 

The next step is to work on your project!

 

Step-By-Step Process On How To Make A Sweatshirt Blanket

This project won’t take long, and you don’t have to worry about the design. Your sweatshirts have it all for you!

 

Step#1. Prepare the sweatshirt patches

Make sure your materials are all clean and prewash your sweatshirt fleece backing. Separate the front and back parts of the shirt and remove the sleeves. Centre your square ruler on your material and cut.

 

Step#2. Sew the squares together

Arrange your squares into four rows with three pieces each. Now, sew them all together.

 

Step#3. Add the backing and binding

Align your fleece to the centre of your patches and pin them together. There may be some “dog-eared” flaps at the end, but that’s alright. You may notice that the fleece shrank slightly after washing. Don’t worry about this though, and it’s normal and easy to adjust.

 

Step#4. Sew the sweatshirts to the backing

Your piece will be inside out at this point. Stitch the backing to the squares and sew a half-inch from the edge. Continue this around the blanket but leave a twelve-inch hole on one side, then turn your blanket right side out.

 

Step#5. Make the corners

Fold your blanket diagonally, then draw a line across the “dog eared” parts. Stitch along this mark and repeat it on all four corners. Remember to check that all the corners sewn correctly before you finish up your project.

 

Step#6. Finish up your blanket

Ensure your blanket is right side out, pin the opening you left, and run all the edges of your piece through the sewing machine. Remember to align your work with the binding when you do this. 

Now you’re done! Time to give your masterpiece to your loved one.

Can You Add T-Shirts To A Sweatshirt Blanket?

What if you don’t have enough sweatshirts, but you’re itching to start your project? You have a menagerie of shirts, can you use them? 

Surprisingly, T-shirts are the more popular material for crafts like these. Luckily, you can mix a few with a sweatshirt blanket and vice versa. 

Just make sure the thickness of the material is somewhat similar to maintain the texture of your work. 

 

How To Care For Your Sweatshirt Blanket

The next thing you need to think about when you have a blanket is if it gets dirty. How should you wash it? 

Care for sweatshirt blankets is similar to T-shirt quilts. Check if the colours run, and if everything is alright, place it in a washing machine with cold water.

For fabrics that run, please bring them to the dry cleaners or a professional laundromat. 

UK experts recommend using a dryer for your blanket. Line-drying it may leave it crumpled and crunchy. 

Check if your blanket develops any holes or loose thread. Mend the hole as soon as you see one and clip the threads that you see. 

 

Conclusion

This blanket is a quirky and unique craft you can try. When you learn how to make a sweatshirt blanket, you will be able to save much-needed space in your closet.

You will have a piece that is beautiful and full of sentimental value!

how to make a pom pom blanket loom board

Guide How To Make A Pom Pom Blanket Loom Board?

If you are interested in making pom pom blankets, you must know how to make a pom pom blanket loom board first. The knowledge is essential because the process of making a pom-pom blanket rests heavily on the loom board.

 

There are two ways of making loom boards. One is with nails, and one is without nails. Of course, you can also opt to buy in the United Kingdom store.

 

However, you get to save money by making one. Making one also makes you more invested in the activity, which makes it all the more fun.

 

Read further to find out how to make a loom board!

 

Steps On How To Make A Pom Pom Blanket Loom Board

Below are three steps on how to make a loom board. We will discuss the one that has nails first. Then, we will discuss the one without nails; and use dowels instead.

 

Step #1. Prepare the materials 

First, you need to prepare your materials. It would help if you had batons, nails, a hammer, and angle joints or brackets in making a loom board.

 

We will use two batons measuring 21 ½ inches for the top and bottom parts of the loom board for your reference. Then, we will use two batons measuring 31 inches for the sides of the loom board.

 

You are free to use a longer or shorter baton! The length is just an example as the baton’s sizes determine the number of nails that one needs to use.

 

You would need 14 pieces of nails for the top and bottom parts for this loom board size. As for the sides, you would need 21 nails. All nails should be ½ inch nails for consistency.

 

Naturally, you would also need a hammer. It’s so that you can secure your nails. Be sure to set the nails up at the same height.

 

The last material you need is the angle joint or bracket. You need four of these for the four corners of the loom board.

 

Step #2. Join the batons together

After preparing your materials, you should join the batons together. The joint is essential to the board will be stable before you hammer your nails.

 

What you need to do is place the batons together. Then, at its conjunction, set up the angle joints. You can set it up inside the frame or outside.

 

Install the angle joints properly so they won’t twist out of shape.

 

If you are curious, angle brackets are L-shaped latches that fuse two parts. In this case, you are merging batons for the loom board at a 90-degree angle.

 

They come in metal, wood, or plastic forms. For loom boards, UK experts recommend that you use metal brackets. The use of metal brackets is to be sure that the loom board is well-supported.

 

Step #3. Hammer your nails

After joining the batons, you would need to hammer your nails. However, you need to find your batons’ centre points first for all four of the batons.

 

After that, you make a crossover point from the two conjoined batons’ centre point. From the crossover point, measure 1 ½ in along the frame to hammer your nails in.

 

Mark every 1 ½ of the whole frame from the crossover point to identify where you have to have to hammer your nails in. Then, you can secure your nails!

 

As mentioned earlier, the nails should be secured and placed evenly. The correct placement is to ensure the evenness of your end product.

 

Can you make loom boards without nails?

The short answer is yes. There are loom boards that have pegs instead of nails. These decrease the risk of getting scratches due to nails.

 

It would help if you had circular wooden dowels for peg loom boards, a wood drill bit, a drill, and a square wood dowel.

 

  • Step #1. First, you have to cut the circular dowels to the same length. Sand the ends of the dowels and drill a 2mm hole into each stick.

 

  • Step #2. Then, prepare your square dowel and mark for holes. We recommend marking them 3cm apart. You can line them in different lengths; be consistent in your markings.

 

  • Step #3. After this, you can use a 6mm drill bit to drill holes about 1cm into the square dowel. Then, stick the circular dowels into the holes.

 

It will be a tight fit, but that’s what we’re precisely going for anyway! It should be a solid fit for it to be stable. After filling all holes with pegs, you’re all done and ready to weave.

 

What are the standard sizes for loom boards?

There are different sizes for pom-pom blanket loom boards. You can get one mentioned earlier or something smaller or larger to accommodate your needs.

 

However, the first distinction you have to know is that 1.5” spaced nails/dowels create numerous small pom poms. On the other hand, 2” spaced nails/dowels make larger but fewer pom poms.

Conclusion

After all this, you now know how to make a pom pom blanket loom board. Not just one type, but two! Now that you can make your loom boards by yourself, you can proceed to make pom-pom blankets.

[mailpoet_form id=”2″]