How to make a throw pillow with piping on its sides is an enjoyable way to either get all of the colours out of the fabric or create the desired shade. However, before we get way too ahead of ourselves, perhaps you already know that throw pillows are some of the essential accessories that you can have in your UK home. Here are some of the reasons why this is so.
They’re not expensive
If you want to add pops of colour to transform your UK home décor without spending a fortune, a throw pillow will do the trick. Aside from this, throw pillows can effortlessly give your indoor living spaces the touch of luxury and texture that you’ve always wanted.
You can change them in a snap
Since these versatile yet functional decorative accessories won’t cost much to make, you can easily change them according to the latest trends, as well as seasons. Keep in mind that there are no rules when it comes to being creative. If you want a lot of space for your creativity while ensuring your pillows will still look good, consider purchasing sofas that come in plain white or neutral colours.
They allow you to express your artistic side
It wouldn’t be surprising to know that each decorative item you have in your home is a reflection of your very own personality. Although couches, tables, and other more oversized items usually last for a couple of years, you can easily change your decorative throw pillows in a snap. Changing the pillows allows you to be fearless at taking risks when choosing specific colours and exciting patterns to express your artistic side.
Ready to Make Your Own Throw Pillow with Piping?
The supplies you need include a cloth cut to the pillow’s dimensions. If the pillow is 18 inches in area, then the front part must have a similar size.
The back portion must have a size of 18 inches if you make a pillow cover, but it should be two inches wider if you want to make envelope locks. You will also require a string that will sew over your pillow for the size of your choice.
Don’t forget that your piping is a tape in the hue you like. The tape must be sufficiently wide to reach around your string, and you can use same it 1/2 inch. You are also required to have a string and an insert pillow with a matching tone as wide as you’ve chosen. An alternative zipper can be used to close the edges.
How to Make a Throw Pillow with Piping: What You Need to Know
Fold the tapestry of the thread. Note that you will choose to cover the string and leave an extra 1/5 inch if the ends of the tape are compatible with the strings. Remove your front pillow cover and put the right side before you.
Place the raw boundary of the tape from the centre of the lower edge of the fabric. You may want to balance all three raw edges. You can opt to invest in a mat with a rotary cutter to create smooth and measured lines during the cutting.
Then, pin the material 2 cm from the edge of the fabric. It would help if you used the sewing machine to make the string near the zipper’s foot. After you pin it in place, put your piece afterwards, and decrease the zip foot.
For 2-3 cm, you want to keep the piping unsewn. Then continue stitching with the correct stitch along the sides of the material. One can observe the bulge that the string creates on the inclination belt.
When you are close to one or two inches from the raw edge, keep the needle in your towel and use your scissors to make roughly 3-5 snaps at the tip. Without screwing the thread, turn the corner.
Repeating the steps
Go on gently and continue working. Keep the needle down on your cloth, lift the foot, move your fabric, and set the pipe to the right side until it’s around 1/2 inch from the raw edge. Then turn your foot down and go to the next one.
You will repeat this method for every corner. Stop stitching on the final side around 2-3 inches until you come back to the beginning. Line the rope ends and cut at each end.
You want to take the tape back and fold it to the cord for this step. Take the edge and fold it to remove the raw side. Then, tuck it in again with the inside of the string. You should notice that the piping is starting to form on the surface.
Return the fabric to your sewing machine, and resume your stitch from the section you stopped beforehand. Continue with sewing the right stitch. Finally, you have the piping in front of your pillowcase.
No matter what sort of pillowcase you’re designing, make sure that the tiny portion of the tape is placed flat on the surface when stitching on the back part. Sewing the back part is essential to avoid unwanted bulkiness on your pillowcase.
If not, the tape will appear in the centre of the completed project and not at the corners. If you add a zipper, make sure you don’t stitch the piping. Ensure you drop your foot and boost the material to check underneath it if the pipes are not under strain.
This kind of project requires patience and perseverance, so it is essential to stop and check the progress occasionally. These easy steps will certainly help you know how to make a throw pillow with piping.