8 Steps How To Make Cafe Curtains For Kitchen Easy?

Do you want to know how to make café curtains for kitchen? If not yet, you’re just in the right place. You will surely know-how as you read along.

I guarantee you that making one is very easy.

Why do you need to make one, you ask?

It’s because it can provide a little privacy without compromising the natural light.

This kind of curtain typically used in bathrooms and kitchens.

But then, in this article, we’ll specifically know how to make café curtains for your kitchen.

 

Steps To Make Café Curtains For Kitchen

You need to execute the steps below on how to make café curtains for kitchen.

I tell you- the pattern and fabric of your curtain will surely change the room’s atmosphere.

The thing is:

Lace-edge, lightweight, and sheer curtains are elegant to look at, while those which have gingham-checked patterns and, of course, vintage towels promote a country feel.

Without further ado, let’s start!

 

Step #1. Identify where to place the curtain top

First off, you need to get your curtain rod.

Then, hold it up to the frame of your window.

In this way, you will know where you will be placing the top of your curtains.

Most of the time, it’s halfway up your window.

However, you have the discretion to choose whether you’ll place it a little lower or higher.

Of course, it will depend on what you want to achieve.

 

Step #2. Create a mark on the frame

The next thing you must do is create a mark to serve as a reference where you want to place the rod.

Mark it on the frame of your window; just a tiny reference will do.

After which, you have to get the measurement between the window sill and the reference mark.

Don’t forget to add six inches to the total measurement.

In this way, you can make a double-fold hem; and that’s from up below your curtain.

 

Step #3. Measure your window’s width

Now, you have to take the width of your window.

The result should be multiplied by 1.5; the measurement is the width of every panel.

 

Step #4. Laying the fabric

After measuring, get the fabric and lay it on a flat surface.

Take note that the right side should face down.

Now, you need to utilise the measurements.

Get the two curtain panels and cut them with the use of scissors.

 

Step #5. Working on the panels

Here’s a tip:

It would help if you worked on every panel with patience. One at a time suggested.

Fold up the bottom part of every panel; the fold should be two inches.

Don’t forget to iron the folded fabric, okay?

Again, fold the bottom up 2 inches. After which, press it with an iron.

Once you’ve created a hem, sew it using your sewing machine.

 

Step #6. Sewing the hems

In the same manner, it’s time for you to sew hems both at the sides and the top of each panel.

It would help if you folded the panel’s top about an inch.

And just like the step above, you need an iron to press the fabric.

Repeat this process; after folding, you can sew the hem.

Using a similar method, make an inch of double-fold hems on the sides.

The process is the same as the other panels left.

 

Step #7. Laying the panels flat

Flatten each panel.

On both ends of the hem’s top, place a ring in it.

Get a tape measure and measure every three or four inches so you can attach the other rings to it.

For the last time, you should press the curtains.

Doing so can help get rid of wrinkles.

 

Step #8. Mounting the brackets

Now that your café curtains are ready, you can mount the brackets of the curtain rod.

Mount these on the window frame.

After which, you can slide the rod with clip-on rings.

Now, the rods already set in the brackets.

The last thing you should do is make adjustments to your fabrics; don’t forget to arrange the gatherings, my friends.

Café Curtains For Your Kitchen

You may be wondering why you would use café curtains for your kitchen.

Well, here is the thing:

They’re undoubtedly ideal as window treatments for your kitchen.

Why so?

They provide an excellent focal point, at the same time, permit enough light to enter the kitchen.

Whenever you need some privacy, you need to close them.

But, closing these curtains doesn’t mean that they will block the light completely.

It can still allow light to pour in the place, thanks to the top half of the curtains!

 

It’s A Wrap!

Yes, café curtains are the best option for your kitchen.

Many people in the United Kingdom would opt for this one for some reasons.

Making one is an easy task, my friends.

Now that you already know how to make café curtains for kitchen, it’s time for you to execute it.

If you have some questions, don’t hesitate to ask us, okay?

We’re happy to help!

But I know that you will no longer encounter some issues as long as you follow the steps above.

what sizes do curtains come in

Free Guide Of What Sizes Do Curtains Come In?

What sizes do curtains come in? It depends; you may opt for standard curtain panels, standard-tier curtains, or standard valance curtains.

Choosing what curtain panel to use can be very daunting.

Some thought that they could buy one from the store after they have got the measurement of their window.

Little did they know that you cannot find a curtain panel of the same size as your window most of the time.

What’s more disheartening is that curtains’ sizes differ from one another, depending on the particular type of curtain.

The most common standard sizes include curtain panels, tier curtain panels, and valance curtains.

Read until the end of this post to know the measurements of those curtain sizes for you to know which one can fit in your window.

 

3 Standard Curtain Sizes

As promised, we will be discussing the measurements of the different types of curtains along with any other information that may be necessary for you.

You can choose from any of them depending on which you think can work best to cover your window.

So, what sizes do curtains come in?

 

Size #1. Standard curtain panels

Most people in the United Kingdom resort to making their curtain panels because if you buy those ready-made ones, you will find out that the sizing option is limited.

Most often than not, the standard sizes that are available in stores include 120, 108, 95, 84, and 63-inch long with a 48-inch width.

They are available in a variety of designs, from a solid colour to sheer to blackout curtains.

Generally, regardless of the design you choose, they all come in the exact sizes.

But of course, you can opt for custom-made curtain panels so that the size will be made precisely based on your window requirements.

But the standard curtain panel can cover any window at your UK house with a standard size.

In the UK you can use it for bathroom, bedroom, or living room windows,

These ready-made curtain panels that come in standard sizes are a versatile solution that you can use quickly and conveniently anywhere it fits within your home in the United Kingdom.

It is also up to you if how many panels you will slide onto your curtain rod.

Remember the golden rule, the more curtain panels you slide, the more it can offer a fuller look.

You might as well layer this under a sheer curtain layer to achieve a gorgeous look.

 

Size #2. Standard-tier curtains

These standard tier curtains are commonly installed on windows that are smaller than the standard size.

But you might as well put this on if you don’t like to cover your window completely.

Typically, it is used to cover half of the window.

For instance, you can hang the curtain on the bottom half of the windows on top of your kitchen sink.

A lot of people in the UK also utilize this specific size in their bathrooms.

But of course, it will depend on the size and placement of the windows.

There are two most common lengths that you can find for this particular curtain type.

It can either be 36 or 24 inches long. For its width, it commonly measures 45 inches.

Like the previous curtain type, you can also get a tier curtain according to the specific measurement you desire if you have them custom-made.

 

Size #3. Standard valance

This type is the opposite of the previous one. It is designed to cover only the upper part of your window.

The most common valance size measures about three up to 5 inches long and about 50 inches wide; this depends on its particular design and style.

It is commonly used when the setup of the window does not require a full curtain. For instance, you can use valance a bay window.

But you might as well put this on if your window already has other types of privacy coverings.

Adding this is usually done for design. But sometimes, it is also used to hide blinds, shades, and screens.

 

How To Choose Curtain Length?

Curtain length can be classified into three. Choosing one will depend on how you want your curtains to look.

 

Type #1. Puddling length

If the curtain is flaring out onto the bottom, it will create a curtain puddle onto the floor.

In general, this curtain length is used for formal and heavy curtains.

 

Type #2. Kiss length

It refers to the length of the curtain that is barely kissing the floor.

Remember that this particular length requires exact measurements.

If you like to achieve this, you will need to consider the hanging method and the hardware to use to impact the results.

 

Type #3. Floating length

There are two ways of hanging curtains with this length.

You can hang this to hover just right above your floor, with only an inch gap between the curtain and the floor.

But you might as well let them hanging beneath the window.

Depending on your window placement, it may or may not float off the floor.

It’s A Wrap!

What sizes do curtains come in?

As mentioned earlier, it can be challenging to choose the right curtain size.

But if you know and understand what you are looking for, the process would be a lot easier for you.

Also, know in advance how you like the curtain to sit onto your window.

6 New Steps Of How To Make Pinch Pleat Curtains?

Knitted pleats don’t only get fun when you try to do it yourself (DIY). It adds a more unified look and polishes your window/door. How to make pinch pleat curtains exposes you to how to give structural maintenance to your curtain, where you think it’s voluminous and rolling on the floor.

It gives the top of the curtain a fancy look and maintains a particular line shape, where you don’t need much fabric at the bottom part of the curtain.

In simple terms, pleat means to fold, knit, stitch, and pinch means to gather many fabrics at the top and sew permanently. You will learn the simple tricks/step-by-step process of how to pinch pleat curtains yourself in the comfort of your UK home.

To get the full knowledge of pinch pleating curtains, make sure you master the following under-listed steps. Note, do not miss action for any reason else; you’d completely wasted your time in reading this article.

Easy Steps On How To Make Pinch Pleat Curtains

These steps are essential and, when followed accordingly, give you the whole ways you make pinch appear curtains. Before discussing the steps, take note of the following;

  • Measuring the cloth/fabric is essential for creating consistent pinch pleats at the top of the curtain – this is important because it corrects uneven pleats’ errors.
  • Make sure you backstitch for the pinch pleat to retain its shape well.
  • Make sure you pinch the pleats to give you the shape right.
  • You need to know the number of fabrics for this project, measure your window width, and add 2-4inches for a seam allowance when pinching before pleating.
  • To know the length of fabrics to be used in this tutorial, “how to make pinch pleat curtains,” measure from the top of the curtain rod to where you’d want your pleated. Add 6 ½ inches in the top hem of the fabric to create your rod pleats. Note that the pleats’ measurement should be 3inch because you will have to sew 5-6 pleats in total. Then, consider where you’d like to pinch pleat your curtain at the top so that they can be an overflow of the even pleated curtain to the ground.

Step #1: Spread the Fabric on a Panel

As earlier stated, you have a 1-inch space left on the panel after spreading your fabric on it. In creating the side seams, the material should be pressed ½ inch, folded over another ½ inch, and sew the edge. Make sure the top edge is kept unfinished for now.

Step #2: Marking the pleats with chalk at the top

In this step, start from the left, on the front of the fabric, measure 5 inches vertically (to the right), and then on the side, make an 8inch parallel line(horizontally) and mark both sides with chalk. Do this process again until you get to the end of the fabric.

Step #3: Pinning

Pin line 1 to line 2 marked earlier with chalk, line 3 and line 4, continually till you get to the last line and sew the top.

Step #4: Iron

Iron the pleats got so your new seam is at the centre of the crease at each point on the line fold.

Note: Seam is the starting point of fabric to either move from left to right or top-to-bottom.

Step #5: Sew

Sew your pleats 8 inches up and 8 inches down on both sides of the fabric. As you proceed in this step, the process of “How to make pinch pleat curtains” is almost done.

Fold ½ inch of the fabric from the top, towards the back, and sew across your pleats to create the sleeve (where you pass your curtain rod).

Step #6: Pinching the Pleated curtain

The final stage is completing “How to make pinch pleat curtains.” In this step, locate the upper part of the fabric – starting from the left to the middle and pin.

Start from the right hem and the middle ( where you have earlier pinned) and join the pinched fabric with the pinch one. You may decide to pinch in a cyclic pattern or any shape you’d wish.

 

How Far Apart Should Pleats Be On Drapes?

Each pleat should be stitched ½ inch from the fabric’s bottom using monofilament thread in this process. The standard spacing is five pleats to 54-inch width in the material. However, you can adjust to accommodate the length of your fabric.

Are Pinch Pleats Old Fashioned?

Yes, you may say pinch pleats are old-style, with the advancement and transformation of the world. For you to answer this, pinch pleats can never go out of style because pinch pleats only add a decorative top to your curtain with an elegant flow.

 

Where can Pinch Pleat Curtains be Used?

You can use Pinch pleat curtains on all kinds of interior décor in blending colour and beautifying the environment, still maintaining its privacy.

How Do Pinch Pleat Curtains Work?

When intending to pinch pleat your curtain, note that the pinch’s reason is to overflow the wrinkles from top to bottom. You can add extra beauty to the pinch pleats by attaching a button.

What type of pinch pleat curtain can you use?

The type of pinch pleat curtain you can is the cyclic pinch pleat curtain.

Conclusion

In considering the ways on “How to make pinch pleat curtains, “the steps listed above in this article should be applied. With a straightforward explanation of the process involved, you can make a pinch pleated curtain to add beauty to your apartment in the United Kingdom.

 

how to get wrinkles out of polyester curtain

How To Get Wrinkles Out Of Polyester Curtain Easy?

Whether it’s due to mishandling or caused by packaging folds, fabric wrinkles can ruin your curtain’s whole appearance. Not to worry, as we’ve got a few nifty tips and tricks up our sleeves to show you how to get wrinkles out of polyester curtain. 

 

Fortunately, polyester is one of the best fabrics to use as curtains because of its durability and easy maintenance. Polyester is also widely known for being wrinkle-resistant and can last an extended period. 

Method 1: Hanging wet curtains

Hanging wet curtains is probably one of the essential steps to eliminate wrinkles from newly-opened polyester curtains. It uses the weight of the curtain to allow it to dry without any creases

Step 1: Prepare your washing machine.

Adjust your washing machine settings on a gentle cycle for small loads. You can keep the water either cool or warm but avoid very cold or hot water temperatures. Add in a small amount of mild detergent. Avoid putting in bleach or other harmful cleaning chemicals.

Step 2: Wash your polyester.

Place your curtain inside the washing machine and let it do its purpose. It should perform the regular cycle for gentle fabric. Let your device get rid of excess water through the spin cycle. 

Step 3: Hang your wet curtains

Would you please take out your curtains and hang them straight on a rod? Make sure to spread out the drape evenly while it is still wet. Get rid of any crease that may form. Otherwise, it ruins the whole process. 

 

The weight of the water pulling on the curtain will let it dry and eliminate the pre-formed creases from the packaging. Hang it where it can get enough sunlight and air exposure. 

Step 4: Use an iron machine

Now that you have let your curtains dry for an ample amount of time, it’s time to get those iron machines up and ready. Get your ironing board and machine and set it to a warm setting. Some irons have a built-in polyester setting that can put them at the perfect temperature. Gently iron the curtains to remove all visible wrinkles

Tip: Fabric steamers

Another way to get rid of those dreadful curtain wrinkles is by using fabric steamers. Hold the steam nozzle close to the curtains and start steaming from the bottom left going upwards. Make sure that you reach the top of the curtain before going back to the bottom. 

 

You can repeat the process as many times as necessary or until the wrinkles have entirely disappeared. Try to do the steaming process in a single direction instead of scattering the nozzle all over the place. 

Quick alternative solutions 

You can skip the washing and drying process when you use fabric steamers. Treat the curtain directly while it is hanging on your window. However, we understand that some fabric steamers may be costly, especially if you are on a budget. 

 

You can use a handheld steamer or a regular iron set on a steam setting as an alternative. Use a 1:1 water and vinegar solution and spray it all over the curtain to smooth out the fabric. Use a handheld steamer to remove the wrinkles and let it air-dry for the next 24 hours. 

 

If you prefer to use an iron on a steam setting, start by filling it with water and turning it on. Hold the iron at about 15 cm or 6 inches away from the fabric before releasing the steam. Move the iron closer to the material and press over the wrinkles areas. 

Tips when ironing

Steam the whole curtain efficiently by moving through a top to bottom direction—iron in straight lines moving downwards to create a clean press and fabric. Don’t hold the iron over an area for any time longer than five seconds. Having it too long over a section of a curtain might burn the fabric and damage it entirely. 

Perks of polyester

Polyester fabric is customers’ all-time favourite when it comes to using them for window treatments. They make gorgeous-looking drapery that adds to the interior’s overall grandeur and design sophistication. 

 

Since polyester is a synthetically made material, UK manufacturers don’t have to worry about the product’s scarcity. It is a trendy choice of fabric not only for curtains but clothing as well. 

 

Polyester curtains are long-lasting, highly durable, wrinkle-resistant, affordable, and comes in many different designs. It’s low maintenance, so it is perfect for those in the UK who don’t have the luxury of time to care for their window treatments. 

Why choose polyester curtains?

Polyester curtains are a fantastic option if you are new to the world of drapery. It is also an excellent choice for individuals in the United Kingdom who have just moved to their first UK home and are unsure what window treatments they should get. 

 

Hang your polyester curtains in your living or bedrooms. Avoid putting them up in kitchens as they are quite flammable and can easily absorb strong kitchen odour. They can come in many different colours, patterns, and designs and adapt to other hanging techniques through back tabs, clip rings, hooks, and many more. 

Summary

Overall, polyesters are excellent materials for first-time curtain users who are not quite fond of drapery maintenance and are unfamiliar with complex designs. Once you get rid of the fabric wrinkles caused by the packaging, you don’t have to worry too much about repeating the process frequently—no more stressing about how to get wrinkles out of polyester curtains

what color curtains go with tan walls

5 Tips Of What Color Curtains Go With Tan Walls In UK In 2022?

Curious about what color curtains go with tan walls?

There are a lot! Brown, white, chocolate brown, grey and mustard curtains and tan curtains would look amazing!

So, do not worry. We got you!

One person’s common instinct is to think of how the curtain should match the wall’s colours.

That will make the whole view seem harmonised and look somehow pleasing to one’s eyes.

Tan is a lighter shade of brown that looks like your skin when exposed to sunlight.

A lot of people in the United Kingdom love how memorizing tan people looks.

That also indicates that tan as wall looks good.

It is a soft colour that can match and highlight different colour curtains. Curtains are indeed important.

These curtains have many uses that can generate your access to them, but they should look good at first glance.

 

What Color Curtains Go With Your Tan Walls? 

Curtains are beneficial.

You can use it in different places and purposes, but then the touch it gives is quite essential.

It adds to your room’s aesthetics by making it simple, elegant, and sophisticated in simple ways.

Moreover, curtains could block too much light or make your life a bit private and hidden from the outside world.

We have here choices for you to choose from, and colour schemes are one.

Your curtains need to match and complement the colour of your room so that it will look adorable.

So, what colour curtains go with tan walls?

 

Option #1. White curtains

First, for tan-coloured walls, the colour of curtains that we can suggest that would perfectly fit is white.

White goes along with almost everything and no cap, saying that even match your white shoes with any clothes.

That principle goes the same upon walls and curtains, considering that the curtain you will use is white.

We call a palette neutral, wherein brown and white belong to it.

You can play with these things accordingly, as one of the reasons why tan and white works so well together are that the light touch of brown and the pureness of white is a pleasing sight.

 

Option #2. Chocolate (cocoa) brown curtains

Another thing that can go with it is something dark. When your wall is light, you should add in a dark colour curtain.

You can add chocolate brown curtains. It will have an excellent reverse effect on your room.

That will show contrast upon colours and a good play on the colour scheme of brown shades.

In that way, it will look pleasing to the eyes.

One thing that could probably make the whole plate better.

Considering that your curtain will be that important, it should be a good opposite of your wall.

Upon adding, it considers that it will not be too dark inside the room when you close your curtains.

Adding a dark curtain to a light shaded room is a beautiful aesthetic.

 

Option #3. Brown curtains (textured)

These curtains would look good as they look like the chocolate brown curtains, although the difference is that these can be any shade darker than your tan-coloured room.

Choose an excellent dark brown color to contrast the color of the wall, and then make sure you find a good textured one.

Textured curtains are often patterned curtains just in the same shade as your curtains.

In that way, it is not that bold, but it will look synced and well balanced.

 

Option #4. Tan curtains (sheer)

This one will look beautiful, but we will not advise you to use these curtains in a bedroom.

It will not add a lot of dark shade or cover the brightness of the outside world.

You can put these curtains up on your living rooms, dining area and a lot more, but it is not that dark.

These sheer tan curtains would look so cute and straightforward in your tan-coloured room.

A play of colours. Sheered curtains would look a little transparent than the heavy ones, but it is in the same shade.

 

Option #5. Sheer white curtains

Another option is sheer white curtains. This one serves the same purpose for your sheer tan curtains.

However, this one will look quite sophisticated and gentle. It will add a touch of uniqueness to the room.

Sheered white curtains would highlight the tan-colored wall, and it will not overpower it.

It will be soft and mild upon the walls so that it will look pleasing and very eye-catching. It is a good complement.

These curtains come in different styles, varieties, and designs; you can choose your own, one that suits your personality.

And you must get with the look and the final touches of your curtains, making sure to wise.

Upon choosing the right one, the decision is always important.

Conclusion

And we are now done with this article. I hope that you will manage to choose the right colour of curtains.

Good thing we have answered, “What color curtains go with tan walls?” and we hope that you got ideas from this.

It is always better to seek something you are not sure of than decide without any basis.

You don’t have to spend a lot of money using your internet and gadgets to look for it online.

How to Hang Curtains on a Wall

4 New Ways Of How To Hang Curtains On A Wall?

Hanging curtains is a great way to project the style you want in a room. Often, when moving into a new home or apartment in the UK, the big challenge is always what type of curtain to put up and how to choose the curtain’s best material. After selecting the type of curtain comes another concern which is how to hang the curtains on a wall.

To answer such an important question, I have researched and experimented with fast and straightforward ways on how to hang curtains on a wall. 

You may see many people in the UK choosing different patterns and steps to hang their curtains; however, you need to follow professional ways and steps when hanging curtains on the wall.

Step by Step Guide on Hanging a Curtain on the Wall

The first step ever on how to hang curtains on a wall is to get the curtain materials ready. The curtain can be homemade, or you can purchase it from any local store or market. 

Step #1: Take Measurements of Your Window so you can Choose Curtains

A good rule is to get curtain panels that are twice the width of your window or more extensive, so you get luxurious folds when they’re hanging and full coverage when they’re closed. 

The curtain length you choose depends on how high you’ll be hanging your curtain rod and how close to the floor you prefer your curtains to be. 

It is always 4to6 inches above the window frame, but to make a room feel taller, hang them closer to the ceiling up to 12 inches above the window frame. 

For a clean casual look, choose a length that falls half an inch above the floor. For a more luxurious puddle effect, choose curtains that are six to eight inches longer than the rod to floor measurement. 

Don’t forget the header of the curtains will factor into height measurements. Rod pockets will hang shorter than grommets or tab tops. Rod should be six to twelve inches wider than your window, so your curtains don’t cover any of your views when they’re open.

Single rods allow you to hang just a curtain or sheer panels; double rods will enable you to hang both curtain and vertical panels.

Step #2: Create Angle Template

The next step on how to hang curtains on a wall is creating an angle template. Using cardboard, create a simple right-angle template to mark your bracket spot to ensure that your rods won’t be crooked. Remember that your brackets should be four to six inches above the window frame and three to 6inches outside the frame on each side.

Save time and use this template throughout your UK home so all your curtains will be hung at the same height.

Using a pencil and your right angle template, mark your bracket spot on each side, following your rod instructions. Attach the brackets to the wall if your rod is longer than four feet; add a third bracket in the centre to avoid having your rod bow in the middle. 

Step #3: Hang the Curtain

Put the rod up and place a level on the top of it too. Check that everything is even and balanced. Hang your curtains on the rod.

Step #4: Tighten the Screws

The last step on how to hang curtains on a wall tightening the screws. Centre the rod and then pull the set screws on the brackets to hold it in place. A gorgeous finishing touch to your room by hanging curtains shouldn’t be complicated.

How can I Hang a Curtain Without Drilling on my Wall?

There are many ways you can use to hang the curtain on the wall without drilling. The steps you can use include;

Where Should you Place Curtain Brackets?

In hanging your curtain, the height at which you place the brackets matters. Both brackets should put at the size you previously chose and then about 4 to 6 inches from both sides of the window. This allowance is to give enough space to open the curtain very well.

How do I Hang Curtains on my Weak Wall?

Often, when you want to hang a curtain, you will realize that the walls are weak. However, following the below steps, you will be able to hang curtains on a soft wall at home or anywhere in the UK.

Step #1. Use a pencil to mark the spot 

Here, use a pencil or any other sharp object to mark the wall where you will hang the curtain.

Step #2: Drill 

Using the drill, make a hole.

Step #3: Next, you will need to use a screw. Tighten a screw on the wall and remove it afterwards.

Step #4: inserting a Molly-bolt

Now, you should insert a molly-bolt on the hole. Molly-bolt comes with curtains, or you can buy it from anywhere.

Step #5: Add screw

Use a screw to tighten the molly-bolt. Next, fix the brackets. You should use a screw to hold the brackets firmly. Next, add finials to your curtain rod, and then put the curtain on the rod. Hang your curtain on both brackets and use screws to tighten.

That’s it. You are good to go.

Conclusion

I hope this write-up has helped you with how to hang curtains on a wall. If you follow the steps mentioned in this article religiously, you will see it’s straightforward.

[mailpoet_form id=”2″]