Have you ever thought of how to make mattress at home in the UK?
Although mattresses sold online are relatively affordable than traditional mattresses we usually buy from local UK mattress stores, there`s another way to save more.
You can try making your bed using the same procedure as those mattress brands.
But for a more affordable option, you can may a DIY mattress.
Even if it is homemade, it can be as comfortable as traditional mattresses for as long as you use quality materials.
Use the information provided below as your guide in making your mattress.
Steps To Make Mattress At Home In The UK
So, how to make mattress at home?
Here is a simple guide for you to follow anytime :
Step #1. Understanding the fundamentals of mattress construction
Each mattress follows a similar setup which as follows:
The base layer serves as your mattress foundation. It typically constructed out of polyfoam.
Support core reinforces the entire mattress and protects it from indentations and sagging. Support layers are either foam or coil-based.
Comfort layers are responsible for providing the overall feel of the mattress. Comfort layers absorb movement and noise and relieve pressure.
Cover polish the look of the mattress as this encloses all the layers of the bed. It also boosts the mattress’s longevity by keeping it out of dirt, bacteria, and moisture.
Step #2. Choosing the type of mattress
The materials that you will have to use in making your mattress depend on your desired mattress type.
Below is the list of the most common mattress types:
A foam mattress is a highly conforming kind of mattress. It provides comfort and helps in relieving pressure points
A latex mattress is durable and hypoallergenic but a bit costly to construct due to its materials
A hybrid mattress offers more silent support as well as pressure relief and improved contouring. A hybrid mattress utilises coils for its support layer
Step #3. Understanding your firmness needs
One advantage of creating your mattress is that you can make it exactly how you want it to be. You can customise it based on your comfort preferences.
You need to ensure your mattress’s firmness level is appropriate to your weight and your sleeping position.
Different firmness is required for each sleeping position as well as for every weight classification.
If you don`t know what firmness is best for you, refer to the mattress firmness guide.
The bottom line here is that softer mattresses tend to conform more to your body. So if you want a less conforming bed, you should prefer firmer materials.
Step #4. Sourcing the materials for your mattress
In making your mattress, you need to prepare the following materials and tools:
- Mattress cover
- Foam for support, comfort, and base layers
- Spray adhesive for attacking the layers (optional)
- Pocketed coils if constructing a hybrid mattress (optional)
You can begin by measuring the base and frame of the bed. Measure its length and width.
The majority of the bed frames particularly sized so that typical mattress dimensions can fit in them.
You also need to measure the height of your desired mattress. In general, adults with heavier weights opt for thicker mattresses since they can provide more support.
On the other hand, short mattresses can provide enough comfort to lighter people.
After finding out the necessary measurements, you now have to buy your materials in the UK.
For the base layer, you need an inch or two of polyfoam. This layer may not be anything fancy.
The support core must measure 6-8 inches. In terms of the materials to use, it will depend on the mattress type that you will be making.
Just take note all foams must be solid. In case you choose latex foams, you should keep them ventilated for enhanced breathability.
For its comfort layers, the thickness should be around 2-5 inches. People in the UK often get firmer foam for the lower layer and a softer one for the upper layer.
Finally, for the mattress cover, make sure to get enough material to cover the mattress’s entire height.
Add up all height requirements of each layer to know how much should you get for the cover.
Step #5. Building the mattress
After completing the preparatory steps, you now have to construct your mattress.
Find a flat surface and assemble your materials there. Take each material out of its packaging.
In as early as now, you have to know that foams typically have off-gassing odours.
This statement is especially true among memory foam.
It is not harmful, but the smell can last for several days. You can air them out first to get rid of the smell.
Now, here are the steps in creating your mattress. These steps apply to any bed you intend to make:
- Spread out the mattress cover onto the floor after you unzip it
- Lie down the polyfoam base layer inside the cover
- Place on top of the first layer the support layer, followed by the comfort layer (make sure that they are aligned)
- Add any extra comfort layers and close the cover
- Put on the beddings and sheets, and take a rest!
It’s A Wrap!
You can now enjoy a comfortable bed without having to spend that much.
Well, how to make mattress at home in the UK is simple.
Now, you can make a mattress based on your personal preferences.
Regardless, here is another guide you want to try out.
For sure, you can rest comfortably well!