How To Wash A Chenille Blanket In 3 Special Steps!

Think about how cosy and warm your chenille blanket can make you feel, but it gets dirty because you can’t wash it. So, how to wash a chenille blanket?

 

In this article, you will know how to wash your chenille blanket properly without risking ruining the fabric.

 

Can you wash it using a machine, or should you stay using your hands to keep it safe from being shredded?

 

Continue reading this passage as we guide you on how to wash these comfy blankets.

 

how to wash a chenille blanket

How To Wash A Chenille Blanket Properly

Blankets made to provide you warmth and comfort on cold and sad days so you won’t feel alone. But you cannot keep them the same way you did before, right?

 

So, as much as it gave you the warmest feeling, the fuzzy blanket needed its bath to keep it healthy and comfortable to use.

 

Step #1. Gentle washing

There are specific ways to wash clothes and fabric, but some materials have their requirements to last long.

 

Chenille is more fragile than they seem. Throwing them in a washing machine is a go, but the cycle must be in normal mode, or else you’ll end up shredding up your chenille.

 

That is why blankets with fabric like this mostly recommended being hand-washed, and one should do it carefully because they will shed if they subjected to too much friction.

 

Step #2. Hand rinsing

If you think that the machine has been too rough with your blanket, you can now wash it with your hands.

 

Hand-washing blankets with fabric like this require cold water with a mild detergent.

 

That is the only way you can lessen the friction that the machine has caused your blanket.

 

After that, the blanket can be rinsed with cold water, and make sure to wring it out gently to remove the excess amount of water.

 

Step #3. Heat drying

The next thing you can do is dry the blanket or use a cloth dryer. As fragile as washing it, it is how delicate it is with drying as well.

 

Some people in the UK can advise you to hang the blanket, but doing so could put up the risk to make the fabric either stretch or shrink.

 

The proper heat will allow the softness of the chenille to re-emerge, so always remember to dry the blanket on a low amount of heat.

 

Remember not to put it in the dryer because that will let bacteria grow. Use steam after washing to remove wrinkles, remove the odour and freshen it up.

 

How Often Should You Wash A Chenille Blanket

Everything has its preference. How often you wash your chenille blanket depends on how much time you spend with it and who you let be close with it.

 

Some people in the United Kingdom wash their blanket every month, maybe because they are busy and such.

 

However, if you are using your blanket every day, it might be applicable for you to wash it once a week or every two weeks.

 

How often you wash your blanket depends on how many interactions you have with it.

 

What Are The Common Types Of Chenille Fabric?

Having a comfortable blanket does not happen overnight; it made the way it is because of the process and most especially because of the materials used.

 

So, here are some of the fabrics that made a fuzzy chenille blanket:

 

  • Cotton – A plant-based material that creates such soft fabrics. This one entirely made up of cellulose.

 

Cotton is soft as they are, but they are at risk for shrinking and stretching

 

  • Wool – These materials are animal-based and composed of keratin-based proteins, which makes wool exceptionally elastic. 

 

  • Silk – This one obtained from insects such as larvae. These are known for their absorbent quality. 

 

  • Rayon – This material gathered from pure cellulose materials; it also has a nice texture and versatility. However, this fabric’s weak point is its durability. 

 

What Are the Characteristics Of Chenille?

 

  • Iridescence – The fibres of the chenille are not originally colourful and bright.

 

Although it wasn’t originally shiny, the pattern of the structure makes it pleasing to the eyes and makes it iridescent. 

 

  • Fuzzy and comfy – Chenille is a soft fabric created from braided or a pile of materials that perfected comfort. 

 

  • Excellent coverage – Chenille has beautiful coverage, which provides warmth for you. 

 

  • Durable – Since chenille mainly made with thick and soft materials, it is sure to provide durability.

 

Conclusion

Blankets come from different classes, and one of the most popular is the chenille blanket. They are comfy and warm, that is why it reigns, and it will keep on reigning.

 

However, knowing how to wash a chenille blanket properly is one of the vital points of obtaining and taking care of them since it will prolong their life.

 

It might be a handful, but knowing how to take care of things is more beneficial than spending money to eliminate them.

how to make a pom pom blanket loom board

Guide How To Make A Pom Pom Blanket Loom Board?

If you are interested in making pom pom blankets, you must know how to make a pom pom blanket loom board first. The knowledge is essential because the process of making a pom-pom blanket rests heavily on the loom board.

 

There are two ways of making loom boards. One is with nails, and one is without nails. Of course, you can also opt to buy in the United Kingdom store.

 

However, you get to save money by making one. Making one also makes you more invested in the activity, which makes it all the more fun.

 

Read further to find out how to make a loom board!

 

Steps On How To Make A Pom Pom Blanket Loom Board

Below are three steps on how to make a loom board. We will discuss the one that has nails first. Then, we will discuss the one without nails; and use dowels instead.

 

Step #1. Prepare the materials 

First, you need to prepare your materials. It would help if you had batons, nails, a hammer, and angle joints or brackets in making a loom board.

 

We will use two batons measuring 21 ½ inches for the top and bottom parts of the loom board for your reference. Then, we will use two batons measuring 31 inches for the sides of the loom board.

 

You are free to use a longer or shorter baton! The length is just an example as the baton’s sizes determine the number of nails that one needs to use.

 

You would need 14 pieces of nails for the top and bottom parts for this loom board size. As for the sides, you would need 21 nails. All nails should be ½ inch nails for consistency.

 

Naturally, you would also need a hammer. It’s so that you can secure your nails. Be sure to set the nails up at the same height.

 

The last material you need is the angle joint or bracket. You need four of these for the four corners of the loom board.

 

Step #2. Join the batons together

After preparing your materials, you should join the batons together. The joint is essential to the board will be stable before you hammer your nails.

 

What you need to do is place the batons together. Then, at its conjunction, set up the angle joints. You can set it up inside the frame or outside.

 

Install the angle joints properly so they won’t twist out of shape.

 

If you are curious, angle brackets are L-shaped latches that fuse two parts. In this case, you are merging batons for the loom board at a 90-degree angle.

 

They come in metal, wood, or plastic forms. For loom boards, UK experts recommend that you use metal brackets. The use of metal brackets is to be sure that the loom board is well-supported.

 

Step #3. Hammer your nails

After joining the batons, you would need to hammer your nails. However, you need to find your batons’ centre points first for all four of the batons.

 

After that, you make a crossover point from the two conjoined batons’ centre point. From the crossover point, measure 1 ½ in along the frame to hammer your nails in.

 

Mark every 1 ½ of the whole frame from the crossover point to identify where you have to have to hammer your nails in. Then, you can secure your nails!

 

As mentioned earlier, the nails should be secured and placed evenly. The correct placement is to ensure the evenness of your end product.

 

Can you make loom boards without nails?

The short answer is yes. There are loom boards that have pegs instead of nails. These decrease the risk of getting scratches due to nails.

 

It would help if you had circular wooden dowels for peg loom boards, a wood drill bit, a drill, and a square wood dowel.

 

  • Step #1. First, you have to cut the circular dowels to the same length. Sand the ends of the dowels and drill a 2mm hole into each stick.

 

  • Step #2. Then, prepare your square dowel and mark for holes. We recommend marking them 3cm apart. You can line them in different lengths; be consistent in your markings.

 

  • Step #3. After this, you can use a 6mm drill bit to drill holes about 1cm into the square dowel. Then, stick the circular dowels into the holes.

 

It will be a tight fit, but that’s what we’re precisely going for anyway! It should be a solid fit for it to be stable. After filling all holes with pegs, you’re all done and ready to weave.

 

What are the standard sizes for loom boards?

There are different sizes for pom-pom blanket loom boards. You can get one mentioned earlier or something smaller or larger to accommodate your needs.

 

However, the first distinction you have to know is that 1.5” spaced nails/dowels create numerous small pom poms. On the other hand, 2” spaced nails/dowels make larger but fewer pom poms.

Conclusion

After all this, you now know how to make a pom pom blanket loom board. Not just one type, but two! Now that you can make your loom boards by yourself, you can proceed to make pom-pom blankets.

[mailpoet_form id=”2″]