How To Sterilize Sand For Plants? 3 Proven Steps!

You have three steps to undergo to learn how to sterilise sand for plants. Remember that sand is one of the most popular media for growing plants because it improves aeration for optimal root health and development. It’s not enough to start plants in an ideal environment, but the medium also plays a significant role. 

Sand is not only a helpful medium in terms of plant health and growth, but it is also relatively affordable and easy to find. However, it’s not enough to directly use sand without sterilising it or risk introducing pests or diseases in the UK  garden. Below are three steps to ensure that the sand you use will only offer you advantages.

 

How To Sterilize Sand For Plants In 3 Easy Steps|

How To Sterilize Sand For Growing Plants

 

Step #1. Preparation

The first step to get your sand ready for the UK garden or container plants is preparing everything you need to sterilise it. Since you’ll be using the oven for this method, you can preheat it at 180°F to make the process quicker later on. It would help if you also washed the sand as an initial clean-up. 

The easiest way to do this is by placing the sand in a bucket and submerge it in the water while simultaneously stirring it. This way, you can ensure that you are cleaning the sand thoroughly before the second step. Continue washing the sand until you end up with clear water, and then you can pour this water out before the second step.

 

Step #2. Submersion

After cleaning the sand, you will do a second rinsing or submersion with hot water. Use boiling hot water and pour it into the bucket to submerge all the sand. Let the submersion sit for some time before pouring out the water and then repeating the process about three times. 

After cleaning the sand with hot water for as much as needed, you must run the sand once more with water. It may seem like so much work, but you’re aiming to have clean sand indicated by clear and clean water after washing. Only after then that you can pour as much water out of the sand.

 

Step #3. Drying

One can only find left with damp sand after the first two steps. To dry it, use a towel until there’s no moisture left. Place the dried sand on a baking sheet for the final stage of sterilisation, but it’s worth noting to spread it thinly to ensure good results. 

Place the sand inside the oven and bake it for half an hour; after all, baking is a tried and tested sterilisation method. The heat should kill any residual pathogens or microorganisms that are left after you washed it. Afterwards, check if there are any moist sand and adjust the baking time if necessary. 

 

 

Why Use Sand For Plants?

The quick answer to this is that sand is an inexpensive way to improve the medium’s porosity. It is easy to find, cheap, and sometimes a free solution to help create well-draining soil. Remember that poor-draining soil puts the plants at risk in standing water that is detrimental to their health and growth. 

It’s best to use horticultural sand, but you can also substitute it with builders’ sand. Aim to have gritty sand to ensure that it’ll help improve the soil structure. However, remember to sterilise it first to ensure that it is free of pathogens that can cause diseases to the plants. 

 

How To Use Sand For Plants

It’s common to mix sand with compost to create a well-draining soil-free medium for starting seeds and cuttings. Mixing is excellent in addition to growing in the polytunnel to ensure quicker root development. The combination of a well-draining substrate and stable environment is best for propagating plants

The mix of sand and peat is also better for container growing because the soil is too compact. You don’t want to suffocate your plant roots by using soil, so gauge the appropriate ratio according to your plant needs. You can also use sand on top of the potting mix or add sand in clay to improve its porosity. 

Lastly, some UK gardeners rake sand into the lawn to prevent it from becoming waterlogged. This way, you’ll achieve healthier lawn grass without the need to do any amendments. You can also create holes in the area to make the improvement easier. 

 

Conclusion

If you have some sand that you want to use in the UK garden or container plants in the greenhouse, there’s a crucial step that you must do. You must know how to sterilize sand for plants properly to ensure that you’re not exposing them to pathogens and microorganisms that can cause diseases. You only need three steps to do so with the help of regular UK household items. 

Start by washing your sand via submersion in a bucket with water, and stir the mix around until the water is no longer dark. Then, boil some water and use this for a similar process. After using hot water, submerge your sand again until the water is clear. 

Towel dry the sand and place it in the oven for half an hour. It would help if you ended up without any moist sand that is safe to use for plants. Properly sterilised sand offers many benefits to your plants, including improving the soil structure, so never overlook these three steps.

 

Gel memory foam mattress how long to expand

How Long To Expand Gel Memory Foam Mattress?

Gel memory foam mattress how long to expand? Have you ever heard of gel memory foam mattresses?

If it does sound new, it is a type or a kind of memory foam mattress sold.

Memory foams are famous in the mattress industry. It is known as one of the best mattresses one can have. It has so many benefits to give out.

You might be familiar with composes a traditional memory foam mattress and how long it takes it to expand fully.

Some memory foam mattresses might be unfamiliar and odd for some people. But then these things exist.

Knowing that memory foam mattresses get sold out quickly and have a very friendly and sturdy foundation, many people look forward to one.

 

How Long To Expand Gel Memory Foam Mattress?

Gel memory foam mattress how long to expand?

Memory foam variants are found all over the world. Manufacturers may export it from one place to another.

And a gel memory foam mattress doesn’t differ much from your traditional memory foam mattress. Let’s say it is a better version of such.

I will give you a brief background about the gel memory foam mattress. It has the same materials as what used in the usual one.

Somehow, what makes it better is that the producers of gel memory foam mattresses infused the mattress with some gel beads, specifically the cooling gel.

That doesn’t change the fact that they are both memory foam mattresses, and they both serve the same purpose.

With that, they might come the same way. They are both called mattresses in a box. When you order it, it also can be compressed or rolled up like normal.

A gel memory foam mattress, like any other memory foam mattress, does expand at the same time.

Since it when through almost every process, they will come out the same.

The expansion of this famous gel memory foam mattress would take about a day or two. And that’s similar to 24 to 48 hours for the standard memory foam mattress.

It expands the same with the memory foam alone. When you open the box and let it stay at your room temperature, it would slowly rise and expand.

It would help if you lay it on a flat surface to expand at the right level and time given.

It also comes with an instruction flyer together with the box.

Following the advised period and other instructions would make your life easier. It would lessen your worries when it comes to the mattress expanded.

Be very careful when you are unboxing it using scissors or a cutter.

Even small damages could mean big. It could also affect the expansion process.

What would happen if you slept on it while 24 hours have not passed yet?

Find out here.

Linked along is the expansion process of a standard memory foam mattress.

Maybe that can help you up and give you ideas on what do’s and don’ts you have to apply.

It is better to have enough knowledge when it comes to this matter.

 

What Is Better: A Memory Foam Mattress Or A Gel Memory Foam Mattress?

You must be very curious about these two and what is the real deal between them. A lot of people are thinking of what is better between the two.

Both can be the right choice when looking for a mattress that could resist pressure upon laying down in it.

Both works for the said to set up.

But then again, remember that the material used on these two is primarily similar except for a few added gel memory foam mattresses.

When it comes to sturdiness, quality, and strength, both will work correctly. Both mattresses are on the same page in this, and no one gets better from the other.

That would only differ from the producers. Different companies maintain different standards, and you have to understand that.

Talking about comfort and the feeling, one would bring home the bacon.

These two could give convenience when you are lying down.

On the other side, a gel memory foam mattress can give you a better feeling and a more comfortable experience. It comes with one particular component.

It is unique for it to have cooling gel beads that give off a cooling effect when you lay down. It also helps when the temperature gets high.

You know that a mattress gets warm when the temperature is. And too thick a mattress could make you feel a little warmer than the thicker ones.

But then, having those cooling gels infused into its gel memory foam mattress is way ahead of its competitor.

The traditional one is way cheaper when it comes to the price, but if you’re looking for a good investment, then gel memory foam mattresses are the best choice.

Regardless, it would still be up to you.

Conclusion!

When buying a mattress, you have to consider many things before, during, and after purchasing it. That takes so much patience to win over.

We have answered, “Gel memory foam mattress, how long to expand?”

I hope you had the idea and answer to your question.

It is worth the wait and money as always. It is just a day or two, so be very patient and enjoy the cooling mattress.

egg crate mattress pad how to use

Egg Crate Mattress Pad How To Use? In 5 Easy Steps

Do you know what’s an egg crate mattress pad how to use it? Laying down on a mattress makes us feel comfortable, indeed.

But we can always add something to that, like a topper, so how do we use an egg crate mattress pad?

There are so many types of mattresses that you could find in stores, online shops, and even furniture shops.

But then have you already found the right one for you?

When you are buying a good quality mattress, you are also buying something pricy.

Of course, that is given. But then you can always look for affordable ones.

In an instance that you would want to add something to make a simple mattress feel luxurious and more comfortable, going for a topper or pad on top of it.

These famous egg crate mattress pads are one good topper.

But people get confused about how you should use it. Isn’t it upside down?

 

How To Use Egg Crate Mattress Pad?

Egg crate mattress pad how to use?

Egg crate mattress is famous for the surface it has on one side.

It indeed looks and feels like an egg crate, and that is why it has so much comfort in it.

You want to follow these steps to put the pad on the top of your bed successfully.

One and for most, this is your choice, so it is always up to you if you would want to follow these or not.

Step #1. Buy your egg crate pad

Of course, you have to find good quality and the most recommended egg crate pad to buy.

It needs to be worth it since the purpose of it is to make things better.

You can find one from local shops near you or even online.

You can ask the staff at the malls, furniture shops for their best seller egg crate mattress.

When shopping online, you can check the star ratings, comments, and reviews of those who already bought the product.

 

Step #2. Unbox your mattress pad

When you already have it at home.

Unbox it or remove the cover on it, getting it ready for the transfer afterwards.

Make sure that you will put it on a clean surface or just above its plastic bag.

 

Step #3. Remove the bed cover

The next thing that you need to do is to remove the bed cover of your mattress.

You have to do this because you should place the topper right above the mattress.

Set it aside for a while, or you can wash it off if you would want to.

 

Step #4. Add in the egg crate mattress pad

By then, you have to add in your egg crate mattress pad.

This step confuses a lot of people who may be like you.

But then let’s end that confusion for now.

You bought the mattress pad for you to have a good sleep and a more comfortable surface to sleep on, so you might as well find out how to do it properly.

However, you might see that the rough surface that is like an egg crate should be pointed on top.

It has its reasons why you should do it that way.

You see, the spaces between the pointed things on it create space for air to flow out of the mattress.

So, it would not trap the hot air and temperature inside.

The structure provides ventilation on the mattress and proper air circulation.

Making you feel relaxed as if the bed is massaging your body.

A lot of this occurs when your egg crate mattress pad is placed rightly on top of your mattress. Make sure it is aligned well.

 

Step #5. Fit it up

The next step is to find a suitable bed sheet or cover.

You have to find a bed cover covering the width, length, and thickness of the whole mattress, including the topper you added.

You can use your old mattress cover if it has enough space left; if it does not, then you have to find another set of bed cover to work well with the whole bed.

 

Is adding an egg crate mattress pad necessary?

For some people, indeed it is. If you are confident enough about how comfortable and cool your mattress is, you do not have to.

It only applies to those who want to add something more to make their sleep better and feel like sleeping on the clouds.

Egg crate mattress has benefits that can help you, as mentioned.

It can relax your body well, it gives a message-type feeling, and its bumps give off satisfaction.

If you have extra money to buy one, I suggest you buy one.

When you cannot sleep well due to warm temperature and uncomfortable mattress, this is made for you.

You are your hero. Do what makes your situation better. Working hard to get good things for one’s self is never selfish. Treat yourself to doing a good job.

 

Conclusion!

When you plan for an upgrade or something new for a mattress, make sure that you know how to do it.

Lack of proper knowledge could make it worse instead of making it better.

And we answered, “Egg crate mattress pad how to use?” I hope you are now confident about how to do it properly.

How to make an outdoor mattress

How To Make An Outdoor Bed Mattress? In 6 Easy Steps

How to make an outdoor bed mattress? Making the most of your old mattress is a brilliant idea.

Putting it up as something that works outdoor would be perfect.

Seeing a mattress, sofa, or any other things inside the house is too familiar. It would be fun to innovate something that could also be part of your exterior.

Most of us walk inside the tour house to rest and relax. I thought that there are times where laying down inside is too dull.

So, I have thought of ways to have good air to breathe, a comfortable space to lay in, and a breathtaking view of nature comes in.

 

Steps To Make An Outdoor Bed Mattress

Making an outdoor bed mattress is no joke.

There are many things to pull off, but then, a new experience is worth the try.

Have you ever thought of putting up your bed outdoors to have a good view, breathe some fresh air, and feel the bliss of nature?

Well, if you haven’t, this article might change your mind.

This activity or project could be helpful, and it is beneficial.

When you have a good quality mattress and go for an upgrade, you can’t just throw the old one if it is still usable.

It would help if you thought of ways to innovate it.

So, how to make an outdoor bed mattress?

You can make an outdoor bed mattress if you would like.

Follow these steps, and I assure you everything will be worth it.

Step #1. Prep the materials

You will be needing a bunch of materials that are affordable in making the bed frame.

One is to have boards, 2×4×80 inches for the centre.

And then two pieces 1×2×75 inches for support.

Another is a 4×4 post for the legs.

Cut it for 12 inches long per leg; a bunch of wood screws that are 3 inches long.

12 pieces of 4 inches screws round head screws that have bolted.

Wood glue, drill, Phillips screwdriver, and wrenches are all the materials you have to use.

 

Step #2. Making the centre frame

Start by cutting the materials. Your body frame must measure 8- inches in height and 76 inches.

For the headboard, you will need 2×6×76 inches.

The support for the headboard is about 2×6 ×17 inches in dimension.

Just glue and screw all the sides for your bed frame. First, attach the inside to the side.

And then, measure the inside of the board frame and cut out another piece of wood.

Stick it into the centre of the frame. That will serve as support.

 

Step #3. Attach the legs

And when you already settle the frame, you have to think of the next step.

That is attaching the legs of the bed frame for support. You can work on it upside down.

It would work easier that way.

The stopper of the mattress must be on the bottom side. Put the legs inside the board, making sure it will attach correctly.

You can drill on each side of every leg to make sure but be careful not to hit the screw on to where you drilled on the other side.

 

Step #4. Add a headboard

On the part where you would want to put a headboard, you may.

Set up the 2×6 ×17 vertically drill it into one of the ends of your bed frame.

See to it that when you put these two pieces of wood, it would be on both sides’ centre.

It would make it even and well proportioned.

The length of what you have added to the headboard will be the same as making the frame’s base.

Add in horizontal woods on the three base blocks of wood.

It does not need to be intact.

You can leave 1 inch every time you are going to add a piece of horizontal wood.

Make sure it sticks to the end wood and level it on the bottom part of that wood piece.

Use glue, then add screws to secure it. Then use the longer piece of wood.

Please attach it to the base for the headboard.

Make sure you mark it where the two bases would be glued or screwed. There are no rooms for mistakes.

 

Step #5. Paint

The last step for the mattress frame is to paint it to look beautiful and pretty. You can choose your colour of choice.

But I would advise you to go for a chocolate brown or black colour.

 

Step #6. Throw in mattress

The last and final step is where you would add in your old mattress.

Make it look pretty by adding the right beddings and a set of pillow on top of it.

Making the most out of your old mattress is one of the best ways to innovate somehow.

But then, if you are thinking of dumping it check this out.

 

Conclusion!

When you have an old mattress that is still in good condition, you can always repurpose it.

One example is making an outdoor bed mattress.

And now that we have answered, “How to make an outdoor bed mattress?”

I hope you have enough ideas and ways to make your outdoor bed mattress work well.

What is a mattress cover

What Is A Mattress Cover? Brilliant Facts You Must Know!

What is a mattress cover? When you have either a luxurious mattress or a simple and cheap one, you surely want to keep it for a long time by using a cover.

You want to know what could make your mattress live long and interact less with pests, dust, and other forms of dirt.

It is better to make things work and last longer than usual. It is all up to you how you protect and preserve your mattress.

Many people don’t know how one is different from another since when a person adds it to the same thing, it confuses a lot.

A mattress cover is far different from a mattress pad.

You sure know that a mattress pad is another layer for a mattress, and it is a part of it.

 

What Is A Mattress Cover?

What is a mattress cover?

Unlike the mattress pad, the mattress is cover is thin and very light. It does not give too much weight.

Do you want to know more? Keep reading to be enlightened.

People sure do know what cover means. It acts like a coating or a barrier to a particular thing.

When policemen say “cover,” it means to protect themselves from enemies.

Are you getting a hint about a mattress cover now? If yes, that’s good, and if not, that’s fine.

I’ll explain it to you further.

People usually use mattress covers to cover the mattress. But that goes down to a lot of uses and work for the mattress cover.

Many often use it to protect the mattress from pests coming in that could ruin the material used and in hotels to limit the transfer of odour from one guest to another.

Indeed mattress cover has a lot of purposes.

It also depends on the material to make it; one can make it of plastic more useful.

When a guest, friend, or family member vomits into your mattress, you’ll have a hard time cleaning it. But then plastic mattress covers would save you from it.

It would avoid all dirt, including spilled liquids to enter the mattress that is a must-have in your house.

A mattress cover can also be your turning point in having a good-looking bed. Once your mattress is old, it gets dirty looking, and signs of usage show up.

One way to hide those flaws found on your mattress is to add luxury-looking mattress covers to make it look elegant and new.

Mattress covers are also the right way of protecting guests if it is for a hotel or even a hospital. You can avoid the spread of bacteria, odour, etc.

You can change the bed cover from time to time, not giving out too much mess and dirt to clean on your mattress.

It can help you save time, and it also gives off comfort and a good feeling when you sleep. You decide on what type you would want to add to your mattress.

Is the mattress pad and mattress cover the same?

While reading the question, you might get to think that it isn’t since it was two different names on it, right?

I will give you more things to avoid confusion and to clarify it out.

A lot of people make things complicated that they believe one piece of information is right.

A mattress pad is like a mattress, and it has some thickness on it containing some foam.

Or when you say mattress pad, it must be a topper for a bed to add in comfort.

People often use it to add bulk and thickness to one’s mattress, feeling uncomfortable or no longer suitable for sleeping.

Mattress pads ensure that you will have a good sleeping surface. It stands as a temporary solution for a mattress that is losing its support.

It is not necessary to add a mattress pad to your mattress. And that is one of the things they differ on. A mattress cover is a must on your bed.

Your mattress won’t be complete if there is no mattress cover on it. The mattress cover would serve as protection for the whole bed.

If you wish for a long-living mattress and something that could grow old with you, you have to make sure it is protected.

Dirt, fluids, and even the odour that create contact with the mattress can damage it slowly.

One thing that you can do is to avoid such by adding a cover to it.

It is up to you if you would like to purchase one.

You have to consider the purpose of it and the material of it. Bed covers are usually thinner than mattress pads.

That’s the truth behind everybody’s confusion.

Again, a mattress pad is far different from a mattress cover. Put that in mind and spread the information.

 

Conclusion!

When you run a household, hotel, or even hospitals, you have to know every single thing, even the most minor details.

What is the use of one thing and how important is it to have is a matter you should consider.

I hope you cleared your mind of “What is a mattress cover?” at least you now have enough information to say that you know its uses.

How to get rid of the mattress smell

How To Get Rid Of New Mattress Smell? 3 Easy Methods To Trust!

How to get rid of new mattress smell?  Sometimes a new mattress smells a little after removing it from its packaging, especially those made out of synthetic materials.

They contain some hazardous chemicals like retardants, for example, that are behind this smell.

The mattress is kept inside a plastic bag to keep it clean before someone purchases it is also why odours of the chemicals are trapped inside.

For this problem, many mattress manufacturers suggested that airing out the mattress thoroughly for at least five days before covering it with sheets.

Other than this, there could be many ways to get rid of the new mattress smell, which we will have to discuss below.

But before that, let us know why it is essential to remove the smell first.

 

Why Does It Matter Anyway?

Materials like polyurethane foam one can use to make synthetic mattresses, including your toddler and baby mattresses.

Such a material emits VOCs or volatile organic compounds. Aside from the odour, these compounds can also cause allergic reactions and asthma attacks.

Formaldehyde present on the adhesive that holds the mattress parts together is another chemical that can bring potential harm.

But as for the smell, the main culprit behind this is the flame retardants required in almost all mattresses.

These retardants cause the chemical fumes we often smell on new mattresses.

Unfortunately, almost all mattresses, including the all-natural ones, contain this particular ingredient.

Not unless the packaging or tag states otherwise.

3 Methods To Off-Gas The Odor Of The New Mattress

Do not be disturbed by the smell of your new mattress because you can get rid of them in the following ways.

Here are the ways on how to get rid of new mattress smell:

 

Method #1. Keeping it fresh

The most optimal solution in eliminating the odour of your new mattress is treating it with fresh air.

Whether you purchase a mattress made of memory foam or the traditional innerspring design, you must get rid of the odour first.

Or even the crib mattresses for your baby can benefit from fresh-air treatment, not just for a better smell but also for increased safety.

To do this, you have to remove the covering or the wrapper – commonly a plastic bag – then air it outside. Precisely, place it somewhere protected.

For example, you can put it on an open garage or a screened-in porch wherein air can flow, and at the same time, airborne debris cannot get through.

Airing out the mattress must be done for several days.

Such a period is enough for chemicals to off-gas and leaves your bed.

In case the mattress is exposed to the pollen of other debris, you have to vacuum it with an upholstery brush.

If you can’t find a suitable location outdoors, you can just set your mattress in an unused room and then open the room windows.

 

Method #2. Use baking soda

Sometimes, airing it out is not enough to get rid of the smell.

If that is the case with you, try sprinkling some baking soda on your mattress and let it sit.

Vacuum the powder after leaving it there overnight.

Do the same on the other side of the mattress the next day.

You can also mix about 20 drops of essential oils into the baking soda before you sprinkle it onto your mattress so that it can retain the scent for several days.

 

Method #3. Room freshener

Some brand new mattresses can make the whole room smell for several days. Using a dash of vinegar can be very useful for this.

You can place some bowls filled with vinegar inside the room. Leave the room with its doors closed behind and allow the vinegar to absorb the odours overnight.

It is also helpful in deodorising the drains.

 

Other Things To Keep In Mind

People do not typically lose formaldehyde in manufacturing premium quality mattresses.

Most often than not, only the low quality or the cheaper ones contains it.

To avoid mattresses that emit fumes or those that off-gas, opt to buy those mattresses made of plant oils.

Or you can get those natural latex mattresses. If you are not familiar with this, one can extract natural latex is extracted from plant materials that also produce natural rubber.

That particular type of material is not as harmful and offensive as petroleum and polyurethane used for other mattresses.

And while you’re at it, you might want to clean your new mattress before using it. A wipe or vacuuming the surface will be enough.

Regardless, that’s how you get rid of the mattress smell. I hope you learned a lot!

 

It’s A Wrap!

Experts recommend that most manufacturers air it out for several days before you sleep on it when dealing with the smell of new mattresses.

You can execute the fresh-air treatment in your garage to prevent debris from getting on it. Or you can place it inside a well-ventilated room.

Others also claim that new mattresses one can already use few hours after you unwrap their plastic coverings.

It varies across different brands, though. Judge it using your nose.

Just remember not to sleep on a brand new mattress if the off-gassing odour still smells very strong.

If the strong odour persists for more than two weeks, it might be a good idea to return it and find a new mattress.

Nevertheless, thank you for reading “How to get rid of new mattress smell?” Have a good day!

[mailpoet_form id=”2″]