Are you wondering how to hang heavy curtains drywall? Don’t worry! The steps are straightforward. And I’ll teach you as you read along.
Indeed, curtains crafted in the UK from heavy fabric effectively block light from coming into your windows.
I know. It can get the job done more successfully than a curtain made of sheer and mild fabric.
Here’s the thing, though. And it would help if you took note of this:
Heavier curtains do have their drawbacks too.
Curtains with this weight may necessitate you to make extra investments into the “hanging technique” you will use for holding these.
Otherwise, those curtains not adequately anchored to the wall may collapse.
You don’t want that to happen.
So, if you understand the proper process, then your hard work will be paid off.
Once you take a look at your new curtains, you will be in awe, I’m sure!
Without further ado, let’s start!
Steps To Hang Heavy Curtains Drywall
Are you excited to know how to hang heavy curtains drywall?
Follow the steps below:
Step #1. Measuring the height and width of your window
First off, you need to know your window’s measurement of hanging the curtains over.
Make sure to measure the height and the width, okay?
Also, remember to provide extra length for the curtain rod.
It should be at least five inches longer than the window.
Step #2. Purchasing your preferred curtain rod
In this step, it depends upon your discretion on what curtain rod to purchase.
However, here’s what you should take note of:
It’s crucial to opt for a robust curtain rod. Why so?
It’s because a sturdy rod is sure to assist the load of your curtains.
Just think about how heavy the curtains are.
Most rods you may found in the market made of flimsy aluminium.
Never be tempted by the beauty or physical look of one.
Consider the quality too.
Well, I suggest a durable curtain rod made of more reliable steel.
Step #3. Running a stud detector
The next thing that you have to do is to run a stud detector.
Do this process over the wall where you will hang your favourite curtains.
As I tell you earlier:
Heavy curtains should have a robust anchor.
And that means that you will want to attach the brackets at once to the wall’s studs.
After which, gently mark the studs with a pencil or any marker.
In this way, you will identify them later on.
Step #4. Choosing the right place to put the brackets
Determine the area of your wall stud.
Now, you can choose where you can place the rod brackets of your curtains.
Use the studs which one can find on either side of the window.
In this way, the curtains will reach the distance over the window.
Step #5. Measuring your curtains
Measure your curtains to find out how high you have to put the rod brackets.
Don’t let the curtains reach far to the floor; this instance may result in issues, which you don’t want to happen, for sure!
Now, it’s time for the installation of the brackets.
Make sure that the curtains hang at least 3 inches from the floor when.
Step #6. Marking the rod brackets
Now, you can put a marking on the appropriate location of the rod brackets.
You can do so by using a pencil or maybe a marker.
Take note of this:
The location is dependent upon the stud’s location and the height you want to hang the curtains.
Also, see to it that the two marks appropriately levelled.
Look at both sides of the window if it achieved.
In doing so, you’re confident that the curtains won’t be hanging at an angle.
Step #7. Holding the brackets into the wall
Now, you have to keep the rod brackets in the wall.
Hold the brackets in the area where you want to install these.
Just put a spot in your desired area using a pencil.
Then, take down the rod brackets.
Step #8. Piercing the wall
It’s piercing time!
At this point, I know you already chose the best location where the brackets will be held.
Get nails and place them in place.
I suggest that the depth of the hole is just a quarter of an inch.
Step #9. Keeping the bracket in place
Now, you have to position the rod bracket in place.
Through the screw hole, it’s time to line the start hole to the top.
You have to put the screw inside the hole to attach the bracket sturdily to the wall.
Repeat the same process for all rod brackets.
Step #10. Attaching the curtains
There are many ways to hang your curtains; this step requires you to attach the rod’s curtains.
Step #11. Finishing up
Wait! Test the bracket’s durability first before you consider it done.
If there’s no problem at all, then congratulation!
There you have it! Your curtains are all set.
There are 11 easy steps on how to hang heavy curtains drywall.
Hopefully, you’ve learned a lot from this article.
Anyway, all the steps discussed above, all of which explained clearly.
Now, it’s time for you to move and hang your curtains in the UK house!