Due to the invention of new and creative ways for installing window treatments, there is no need to use traditional curtain rods. Some UK designers are taking bold steps from what has become a convention by introducing these new ideas on how to hang curtains without rods.
Methods on How you can Hang Curtains Without Rods
- Tension cables
- Staples and furring strips
- Cabinet knobs
- Upholstery tacks
- Hook-eye screws and drapery pins
It is the first-ever method when it comes to how to hang curtains without rods.
Tension cables are essential because different types of curtains require other means of hanging. One good option is a tension cable, which can accommodate grommeted, rod pocket or ring clipped type rods, but it’s also perfect for lightweight fabrics like sheers because they don’t need any weight support.
With the help of IKEA, you will buy all your hardware and cables in one kit. You need two turnbuckles, two-wire clamps, anchors, or screws for securing hooks on the wall with a length of at least 1-1/2 inches more than what is needed, as it’s better to have extra cable when setting up rather than not enough.
Steps on setting up Tension Cables
Step #1: Screw the hooks into the wall, one on each side of the window opening, to hold tension rods in place and adjust for length according to your needs.
Step #2: Create 5-7 inch loops at the ends of the cable, fasten with wire clamps
Step #3: Thread wires through grommets or rod pockets
Step #4: Secure end turnbuckles onto cables by twisting both ends together until it is tight enough not to be moved anymore but loose enough when you tug on them without ripping out chunks from their sockets
Step #5: Trim excess wire and tighten turnbuckles so they stay secure.
It is another excellent method on how to hang curtains without rods. You will need to install cabinet knobs above a window to create an informal rod-less solution for hanging tab or tie-top curtains. Use this option if you do not want the formal appearance of rods and bars in your UK home but still need some way to hang up drapery on windows.
Steps on Setting up Cabinet Knobs
Step #1: To hang your curtains, measure the space between each tab or tie and mark them on a level surface.
Step #2: Mark where you will drill pilot holes into the drywall using these measurements to evenly spaced when you attach hooks to install knobs later.
Step #3: Once drilled, insert wall anchors if there are no studs to ensure that it is secure enough before screwing on any of your cabinet knobs.
Step #4: Loop and tie some ribbon around each knob once installed for an extra touch!
Staples and Furring Strips
Another inventive method used when hanging curtain rods are long sections of plywood called “furring strips.” While many different materials could work well for attaching hardware (e.g., hammers) or nails into walls or studs, there’s no better material if you’re only going to attach one piece because firmer boards tend not to stay put on their own very well.
Steps on setting Staples and Furring Strips
Step #1: Make your furring strips, purchase the appropriate length of faux wood and paint it to match your wall.
Step #2: Then screw or nail this strip into studs for the installation to be as secure as possible when you staple curtains onto them.
Hook-eye Screws and Drapery Pins
The possibility to hang curtains without a curtain rod will allow the look of pleated panels while maintaining the formal appearance one would find in an office building or high-end hotel room.
Steps on Setting up Hook-eye Screws and Drapery Pins
Step #1: Drapery pins placed across the top of your curtain panel.
Step #2: Using a pencil, take measurements of where you want to put them on each side, ending up opposite from one another at the end so that when you pin it in place, they will be even.
Step #3: Use an eye hook screwed into those marks before attaching any drapery pins; this way, they can hold onto anything without slipping out or needing as much weight behind them for stability as well!.
Some people in the UK like the idea of having curtains in their homes. Some people in the UK do not, though; they are just there for decoration and colour. If you want to dress up your stationery curtain panels without spending a lot of money on curtains that only serve one purpose (to block off light), then use some fabric tacks instead!
The use of some fabric tacks is an almost too easy way to get fancier drapes with little effort put into it all!
Steps on Setting up Upholstery Tacks
Step #1: To make a window curtain, get upholstery tacks in the same finish.
Step #2: Do some dry runs to determine how big you want your pleats and how many are needed so that when they’re all appropriately hung, it will cover up the whole window space.
Step #3: To start with, push one tack into each corner of where you plan on hanging them from – this should be at least three inches away from any other ones already put in place (depending on what look you like).
Step #4: Next, take fabric and create a bunch of little pleat shapes by hand or machine; then attach these to opposite walls about 3 inches apart as well until there’s no more room left for another one!
I hope reading through this write-up has widened your knowledge on how to hang curtains without rods. It is easy and straightforward to make.