Are you curious about how to make fishtail swag valance?
Do not worry because we will discuss it today.
You will learn a lot of new things right now.
By just sitting there and relaxing, scroll on your phone and read this article with an open mind.
Now, let’s get started.
Fishtail Swag Valance
A simple curtain is casual, and it may look too familiar. However, adding a twist to it and opt for something extra could change that plain-looking attribute.
There are many ways to make your curtains look so much better, but one way of doing it is to make fishtail swag curtains.
Please have some patience because, in a while, we will be giving you the steps and guidance needed for you to do.
These are good for living rooms since fishtail swag curtains are known for their eye-catching and sophisticated look.
Now, let’s proceed to the steps.
Steps To Make Fishtail Swag Valance
Most people in the United Kingdom love fishtail swag valance as it adds a bit of formal touch upon rooms where you chose to put it.
It looks better in dining rooms and living rooms.
You might find them simple, but the elegance and uniqueness of the curtain give a different touch when hanged in a room.
Regardless, you will have to try doing all the things possible to achieve this fishtail swag curtain look.
We will help you out with a guide with step-by-step instructions, and you will follow it up.
Nothing done quickly, so better be patient and do your part so that you will be able to have these beautiful curtains.
So, how to make fishtail swag valance?
Here are the steps you will have to follow.
You better get a screen capture of it or have it listed.
Step #1. Measure the dimensions
You will have to start by measuring your curtain’s width and length, making sure it is correct.
You have to think of how you would like your drop to refer to how the curtain holds and falls along the sides.
The measurements you will need for this one are about 2/3 in maximum and 1/3 minimum based on the height of your windows.
For example, if your window’s height is about 40 inches and you wanted to have a drop of about 45 inches, it will be like this.
40 + 45 + 45 + 4 = 134 inches.
You might get confused why there is an additional 4 inches. Well, these made for the seams.
Step #2. Measure and cut
You can apply the necessary measurements to ensure that your fabric is already cleaned and ironed (soften it).
Measure about 25 inches in width and 134 inches in height.
By then, divide it in half by folding the fabric—about 25 inches by 67 inches.
Step #3. A trapezoid
One of those draws a straight line that marks the other corner right along with the corners.
That doesn’t include any gold, be very careful.
You have to cut on the line you made, only if you unfolded it already.
Make sure that you will have a shape like a trapezoid.
Step #4. Sewing
Your fabrics you must place facing sides together.
It would help if you started in the middle of it for the mark.
Sew all over the perimeter of your curtain with a half an inch seam on it.
This one should be applied and done rightly.
Right before you end stitching, leave at least 3 inches open.
Make sure that it is that measurement, or you will have a hard time.
You have to clip the corners, and you will pull out your fabric through the 3 inches hole you left open earlier.
Do this until the right side is out.
Step #5. Final sew
Then after that, you will have to sew it by hand, the 3-inch opening you left earlier, to close the pocket of your curtain fully.
After that, iron and make a wrinkle; you have to lay its length on a flat surface.
Grab the shortest side and make that a point to start.
Fold it, giving 2 – 3 inches allowance to the liner.
Continue doing this until you can see your wrinkles sitting nicely all over the curtain’s surface.
Step #6. The fishtail
You will get the fishtail and drape it over the pegs that hold back in that way.
The curtain’s long point will go against the wall.
That will make the jabot sides, which are shorter facing your window.
And with that, it should look nice.
Many people in the UK are amazed by how fishtail swag curtains look, and so are you because you made it yourself.
The curtain has a unique name, and you might be interested in reading more articles about this.
Then, I suggest you click here.
Nevertheless, that is all.
And we are now done with our article.
We hope that you have learned a lot of new things with us today.
Good thing we answered the steps on how to make fishtail swag valance.
You now have new knowledge to share with loved ones.
Continue to explore and do something out of your comfort zone.
Making curtains might be easier to do, but doing this fishtail swag version of it is bringing you to a higher level.