Are you wondering how to make curtains longer? Worry not! I have some steps to share with you.

When you see great drapes hanging into your UK home, you feel so much comfortable and appreciated as the view it produces.

As a starter in these kinds of things, I recently discovered you could maximize your draperies’ size without sewing.

It done by removing the hem, pressing the previous hem, and adding the new material.

Well, I won`t stop you right now. So, without further waiting, scroll down and enjoy reading the article!

Steps To Make Curtains Longer

If you moved to a new UK home or noticed your drapes are not in their appropriate sizes, you might be needing an extension.

I have done the steps that I shared where my UK room had shorter curtains, producing an unpleasant look.

In this guide, you will need to gather these materials:

• Short curtains,
• Extension cloth (maybe lace or similar material to your curtains),
• Bonding sewing web,
• Stitch unpicker/ seam ripper,
• Flat cloth iron,
• Ironing board, and
• Damp fabric.

Now, let`s delve into the steps on how to make curtains longer:

Step #1. Removing the hem

Start this method by removing the bottommost hem of your curtain. The hem is the side of a cloth that has been turned over and sewn.

Commonly, it is the area where you can find the stitches of the fabric. Remove the hem by using the seam ripper.

Carefully do this step as it can damage your curtain if done incorrectly.

Step #2. Pressing the hem

After carefully removing the stitches using a seam ripper, place your curtains on the ironing board and prepare your flat iron.

Make sure your iron`s setting is on the appropriate material to protect the fabric. I recommend you use an iron with a steam setting.

When the iron is ready, carefully flatten the hem where the stitches removed. Make sure the curtain is not burnt or rugged.

Step #3. Adding the new material

As you had the edges of the hem flattened by an iron, measure your extension fabric and relate it to the width of your curtain.

You should need to measure how long you need to attach your extension fabric to your short curtain.

After you had measured appropriately, take your bonding sewing web and put it on the edges of the curtain.

Then, lay your extension fabric on top of it. Now, take your damp cloth and apply it to the surface of the extension.

Using your iron, press the damp fabric on the extension for about ten seconds. I strongly advise you to press only the iron, not moving it sidewards.

Finish this initial step in ironing all the areas that you had placed your bonding web.

Next, repeat the entire step if you need a second layer of extension fabric.

If so, layer each fabric appropriately and follow the ironing step with the bonding web.

Finally, place your curtains on the desired window you had chosen. You will see the difference as the curtain is longer than it was before.

If you enjoy these kinds of DIY guides, I suggest you come here!

Tips In Hanging Your Curtains

As you finished extending the length of your curtain, I would like to share with you some tips in perfecting their location in your UK home.

Standard curtains

It would help if you placed drapes of regular sizes on the side of your windows. Please take note that their heights are somewhat in the middle of your window.

Cathedral ceilings

If you need to hang your lovely curtains to your taller cathedral ceilings, you should dedicate at least 4-5 inches of space on top of your window frame.

This tip will act as a guide in perfecting the position of your drapes.

Also, any height of a ceiling makes the standard distance of 2 inches in placement.

The placement distance is the minimum distance from the summit of your window to its pole.

Finally, if you want to create an impression of a tall window, place the curtain poles closer to your ceiling.

This tip will work for most ceilings that hand low in UK houses.

Curtain length

Your curtain should hang above the floor about 1-2 inches.

This one will prevent your drapes from damage and any casualties that may happen.

Also, forbade your drapes to hang a vast space from your floor.

Someone might find your UK room unpleasant as this makes your ceiling shorter in height.

Let’s Sort Things Up!

Great! Now you learned how to make curtains longer.

It would help if you had your desired curtains, extension cloth, bonding web, iron and ironing board, seam ripper, and damp fabric.

First, you should remove the hem at the bottom of the curtain. Consequently, press it with your flat iron.

Then, apply your extension fabric with your bonding web then iron it out with a damp cloth in between your iron.

I also shared some tips for you in finding the best placements for your UK home curtains!

Hoping this article will help you! Thank you very much for reading!

How to make curtains tie backs? You can execute six steps, all of which are very easy to do!

Just read through the article, okay?

Curtain tie-backs can be the perfect finishing to your drapery or curtains.

If you are not familiar with this, they are a form of material winded around the curtain, then looped onto the hooks attached towards the wall.

These are beautiful accessories that are very helpful if you want to let the light enter your UK room.

With this, you can also show more of your creative and artsy side.

However, tie-backs do not only look great, but they are also very functional.

But remember that you need to be practical when making one.

Make sure to take into account your curtain or drapery weight.

This one is important in ensuring that you will get the suitable material to hold the curtains back successfully.

If the curtain is made of lightweight material only, then a tie-back made of any material can hold it.

For its hook, those light cups would also be sufficient in keeping it in place.

6 Easy Steps To Make Curtains Tie Backs 

As mentioned earlier, fabric tie-backs are simply rectangles of cloth that come with plastic hooks.

These hooks attached on their end.

But its ends might also be knotted or tied together, thereby creating a loop.

So, how to make curtains tie backs?

To make one, prepare any fabric that you liked, get a measuring tape, and then follow the steps below.

Step #1. Measuring the fabric

In creating tie-backs, you need to hand your drapery or curtain first to measure the precise length you will make.

Once your curtain has been hanged already, try scooping it from your window to see if how it would look with a curtain tie back.

Get your tape measure, start looping it around the grouped curtain, and note the inches that your tie back needs to be.

But remember to add additional inches if you intend to bow, knot, or tie it.

Step #2. Deciding the width of your tie back

In deciding the width of the tie-back, several things are to consider.

For instance, you will need to base it on the weight of your curtains.

Remember the golden rule, the heavier your curtains, the wider is its tie-back requirement.

Aside from that, of course, you would also want to consider your personal preferences when deciding on the width.

You have to know what style are you after.

Once you have decided on this, make sure to double your desired width.

More importantly, it would help if you put an inch allowance for the seam.

Step #3. Cutting the fabric

Since you now have all the required measurements, you can now get the fabric you choose and lay them out in your working space.

Then, cut the fabric into the proper measurements.

Step #4. Sewing the fabric

Start sewing the fabric into a long tube to make its seams.

It must be about half an inch.

The wrong side of the material must be facing outwards.

After the seams, you now have to sew an end of the curtain tie back and then push it inside out to let the fabric show’s right side.

You can do this by using a ruler.

Step #5. Sealing the fabric`s open end

It would help if you tucked in about half an inch to sell it on the open end of the fabric.

Either you do this by hand or use a glue gun in closing it.

Step #6. Finishing your curtain tiebacks

Now, it is time to complete your tie-backs.

You either knot its end to make a loop which you use as a hook when attaching it to the wall.

But you might as well add wood or plastic rings if you like.

Finally, your curtain tie-backs complete.

Meaning to say, you can now add some finishing touch onto your curtain or drapery.

Are you now interested in reading more articles?

Then you want to check this out.

Nevertheless, that is all.

It’s A Wrap!

A curtain tie-back can be an excellent finishing to your curtain or drapery.

It can add style to your window dressing.

This material is not only a cute decoration that can accentuate well with your interior decoration, but this is also functional and practical.

In most cases, finding the perfect tie-backs that can work well with your curtains and your interior design while being functional at the same time is hard.

But you can learn to make them ensure that it will match your curtain.

Making your own is also a great way to put your creative style into your UK home’s decorations.

Plus, you will be able to choose any fabric you like that can complement or match the fabric of your drapery or curtain.

Everything is up to you.

One tip that you have to remember is to ensure that the fabric is within the room’s overall colour scheme.

If you opt for one-colour or fairly neutral fabric in dressing your window but want to add some flavour to this basic creation, a tie-back is the answer.

Just choose any contrasting motif or colour from among the decor of the room.

Now, you know how to make curtains tie backs!

There are nine easy steps on how to dye curtains. All the steps are simple to execute; I`m sure it will just be a breeze for you!

It would help if you had a dye solution, water and other tools to get this done.

Dyeing your curtains can be very challenging to do. But succeeding in this task can surely give you satisfaction.

The only tricky part throughout the entire process is selecting the right color to die your curtain and finding out the amount to use.

Then, the rest would be a breeze for you!

In this article, we will be guiding you as to how you should complete the task.

We will be including what you should and should not do when changing the colour of your fabric.

So stay tuned, folks!

What Are The Things Needed?

Before we get right into the dyeing procedure, let us first know what can be handy.

As much as possible, it would help if you prepared all of them.

Here`s the list:

• Bin, bucket, or tote
• Fabric
• Warm water
• Rit dye (either synthetic or natural)
• Vinegar or salt
• Hot water
• Rubber gloves
• Sharpie marker
• Laundry detergent
• Mixing utensils
• Measuring cup

9 Steps To Follow To Dye Curtains

After you have prepared all the supplies needed, let us now start the dyeing process.

Just follow the steps provided below on how to dye curtains:

Step #1. Selecting your dye

Check the fabric and identify the right die that will work best in it.

Perhaps, your curtains made of hundred-per cent cotton.

You can use Rit dye that specifically intended for natural materials.

But there are also Rit dyes that made for synthetic materials.

Step #2. Prewash or soak the fabric

Soak your fabric in warm water so that the dye will spread evenly later on.

Step #3. Get a dye container

As you are saturating the fabric in water, you need to prepare the dye bath.

Find a large container that is enough for your material to fit in.

Remember the golden rule, the bigger, the better!

That is because it can provide more room for your to manoeuvre and agitate the fabric.

Step #4. Marking the container

Use a sharpie to create a fill line on your container.

This step is for consistency and convenience.

Step #5. Adding the ingredients

Pour the hot water until the fill line of the container.

Add a cup of salt and a few ounces of dye.

Stir the dye bath evenly until everything is combined and dissolved.

Step #6. Testing the colour and dropping the curtain

Dip a piece of cloth or a paper towel carefully into the mixture to check the dye colour.

Soak the fabric if the dye looks fine. Just dye one curtain at a time.

Step #7. Agitate 

To ensure that the fabric will be dyed evenly, you can set your timer and stir it every five or ten minutes.

In this step, you are simply making sure that the fabric is not folded or creased on itself but instead moved around only.

Essentially, you are ensuring that the fabric will not come out splotchy or lighter than it has to be.

Depending on how saturated or dark your desired colour is, you can soak the fabric in the mixture for thirty minutes or even longer.

Step #8. Rinsing the fabric

Take the fabric out of the dying bath carefully and rinse it using cold water.

Repeat the rinsing process until the water that is running out of the material is evident already.

Step #9. Washing the fabric

Put the fabric inside the washing machine and add a mild detergent.

Let the fabric tumble until it looks good and even.

Finally, dry.

Things To Remember

Before you start, I like to highlight some of the things below.

Make sure to apply them so that the process will be more straightforward.

Some of the things listed here may be very obvious, but I will still include them just in case.

Do`s

• Utilise a container with enough space
• Confirm whether or not the dye is compatible with the fabric material
• Set a timer for agitation
• Wear rubber gloves and old clothes because the process can be very messy
• Test the colour first before adding the fabric
• Make sure to use a measuring cup

Don’ts 

• Don`t be afraid to mix different colors
• It would be best if you did not overcrowd your die bath
• Don`t skip vinegar or salt
• Do not forget to set the timer for agitation
• Don`t forget to soak the curtain before dying

Quick rules

• You can dye your curtain to be more saturated, bolder, or darker, but of course, it cannot go lighter than its current color anymore;
• Achieving a uniform and solid color is way more complicated than a random or organic pattern such as shibori;
• In case the fabric comes out splotchy, don`t worry because you can still overdye it;
• The broader and larger your curtain panel, the more challenging is the dyeing process; and
• Each fabric or material requires a specific dye.

And that`s how you dye a curtain. Do you want to read more articles? Click here!

It’s A Wrap!

Now, you know that you can still change the color of your curtain into something more saturated, bolder, and darker.

However, you would need some time to learn the process.

Furthermore, it takes a few trials and errors to find out how to dye consistently and evenly.

But following the steps above on how to dye curtains, I know you can do it right!

How to make back tab curtains? Read on!

Making your curtain panels will surely save you some bucks.

You know those drapes can be very expensive sometimes.

Luckily, sewing your back tab curtains would not take much of your time and money.

Aside from that, it will also let you customise the treatment of your window however you like.

Plus, you can ensure that it will fit the space and style of the UK room. There are a lot of DIY ideas that you can copy.

These sewing projects can transform your UK room without costing you that much money and effort.

To get started, all you have to do is choose the fabric to use and measure the height and width of your window.

You can use any fabric material to make your back tab curtains. Just ensure that it can complement the overall theme of the UK room.

Continue reading until the end of this post as we teach you how to make your back tab curtain with just a few easy tips.

 

What Are The Things Needed?

Before anything else, you must know the things that you need to prepare first.

Ensuring that the tools and materials needed are readily available near you is the key to finishing the project in no time.

Below is the list of the tools and materials that you will need as you perform the project:

• Fabric scissors
• Tape measure
• Fabric marker
• Straight pins
• Ruler
• Sewing machine
• Iron
• Thread
• Fabric

 

6 Steps To Make Back Tab Curtains

After you have prepared all the materials and tools needed, for sure, you are now ready to go.

How to make back tab curtains?

So without further ado, below are the steps to follow when making a back tab curtain:

 

Step #1. Measuring the window space

Before going out to the market to buy fabric, you have to measure your window.

Determine the length that you want your back tab curtains to be.

If you already a curtain rod mounted over your window, measure the length from there and add seven more inches into it.

This number is beneficial when finding out the right amount of fabric to purchase that will be enough for your project.

If you are not sure how much you will need, you can refer to the guide in calculating fabric yardage.

Just remember to look at your window’s width and ensure to purchase enough fabric that can cover the space when you close the curtain.

 

Step #2. Cutting the curtain pieces

Take out the fabric panels that you bought and start trimming the edges.

In creating the curtain tabs, you need to cut eight pieces for every panel.

Each piece should measure 5 inches square.

Now, in making the facing piece that will hide the tabs, you also need to cut 5-inch long pieces with your panel’s width.

You will need to prepare sixteen tab pieces with 5×5 measurements and two 5-inch facing fragments with a similar width as your panels.

That will be enough for two curtain panels.

 

Step #3. Preparing the tabs and the facing pieces

Start folding each tab piece in the middle with the raw sides and stitch about an inch seam.

Then, turn its right sides out.

After that, you can now press it at the centre.

Now for the facing pieces, fold two inches on its short edge, press the iron and unfold.

Then fold the line you just pressed in half and stitch again.

After that, you have to create a half an inch crease by pressing one of the longer edges.

Just leave its other edge.

 

Step #4. Pressing and pinning the tabs and panels

For the two drapery panels, one must lay it out so that you can press about 2 inches on each of their long edges.

Then, turn down about an inch of it.

Start stitching about an inch near the fold from the outer edge.

After you stitch the two longer edges of every panel, space the tabs evenly across the shorter edges.

Then, pin those tabs onto their proper places at the fabric’s front side.

Make sure that the right sides and the panel are together and the raw edges are up.

Start pinning the facing pieces above the tabs after that.

In between each tab, you have to pin and stitch about half an inch seam across them.

 

Step #5. Pressing and stitching across the panels

Fold the facing piece and the tabs to every panel’s back and start pressing them in place.

Now you can start stitching the entire panel’s width.

With a seam that can be about half an inch wide, you can tuck all the ends of the tabs underneath.

 

Step #6. Finishing

Now you are left with the bottom of every panel.

Press it for hemming and stitch.

After completing the hemming, you can now hang your back tab curtains and admire your hard work.

Want to read more articles? Click here.

That is all.

It’s A Wrap!

In just six easy steps, you can create your back tab curtains. Very simple, right?

I know the whole process will be a breeze for you for as long as you got the tools and materials.

So make your back tab curtains now!

I hope you learned a lot from this article, “How to make back tab curtains?”

To make a DIY project of hanging lights behind your curtains is like choosing to read an adventure novel on your own. To rate this DIY project’s difficulty level, you should be an adult and know the basics of wiring accessories, not like you have to be an electrician to make it awesome.

This article will take you through the simple step by step on how to hang lights behind curtains. You may start hanging lights behind curtains by creating your power source for the lights you want to use.

You will choose the convenient one for you; either you use already made light strings, or you can take the project of creating your light strings by yourself, which gives you open-ended customisation.  

Step by Step Process Of On How To Hang Lights Behind Curtains

You will need to get these supplies before you start:

• SPT1 or SPT2 Zip Cord Wire
• SPT1 or SPT2 Inline
• Male and Female Zip Plugs
• Wire Cutters or Sharp Blade
• String Lights 

Step #1: Create Power Source for Your Curtain Light Using the Zip Cord Wire and Inline zip Plugs. Cut out a piece from the zip wire measuring up to your space in length. You may want to include extra length so that your light may reach the outlet when it hangs then, so cut out your zip cord wire, adding more feet. 

Step #2: Layout your wire straight, begin from one end, add pieces of tape to the point where you can hang your lights. If you want to have a foot spacing between your light strings, put a piece of tape, adding a foot along the wire.    

Step #3: At each of the tape markers, install a female inline zip plug.  

Step #4: At one end of the wire, install one male zip plug and install on the other end a female zip plug. Do not use inline plugs for these; that is, the wire should only go inside from one end and must not come out through the other end of the pin.

Step #5: Ensure that you test each inline zip plug when attaching them. Do this by plugging in one set of lights to know if there is a good enough connection on the pin. Please note that you must unplug the cord, then you can now add all your new plugs.   

Step #6: Install your power source to the surface where you are hanging the lights. You can secure yourself to any awning metal bar that is quite sturdy by using zip ties.

If where you will hang your curtain lights has no natural structured support for hanging your wire, you should consider cutting out any piece of wood which is the length you require or get a metal bar that would be able to provide enough support for your wire’s weight, the plugs and for when you hang the string lights. 

Step #7: You can now plug in your light strings! The last step on how to hang lights behind curtains is to hang them! Here you can choose what you want for yourself.

You may want to get already made light strings or make one yourself. Either way, it is time to light it up! However, you may desire to use more giant bulbs or create your own custom curtain light colours, all to your taste.  

How do you Hang Sheer Curtains With Lights?

Just drape string lights simply on your curtain rods which are nearest to your window. Hang your sheer curtains on the road nearer to it, and that’s it.

 

Which Lights Work Best for how to Hang Lights Behind Curtains?

String lights are the best and most used lights that you use for decorating your UK home during holidays, but they are also helpful when you need soft lights behind curtains in the rooms in your home in the United Kingdom.

You hang these lights from the ceiling down behind curtains to give you another custom design that is more fun while lightening up your space.

There are several different patterns of string lights you can try behind your curtains, like a simple outline, zig-zag, or the traditional wall design. Once done with hanging string lights behind your curtains, you can’t help but enjoy the cosiness.

How do you Hang Ceiling Lights From Curtains?

Install curtain hooks around the edge of your ceiling at an interval of 2 ft (61 cm). Use adhesive-backed cable hooks, preventing you from damaging the ceiling when you are hanging the lights.

Peel off the backing from the hooks and press onto the ceiling. Hold for about 30 seconds until you are sure it is secured. Continue by placing hooks around the ceiling in your room at intervals of about 2ft or 24 inches.   

Conclusion

You may have any of these two reasons why you want to know how to hang lights behind curtains. They are the most incredible, most straightforward features to make your UK home more beautiful.

Firstly, you may want to hang curtain lights behind your curtains to give your space a cosy feel with indirect light.

Also, the hanging lights behind your curtains could serve as backdrops for your pictures, whether you are throwing a party or just a gathering of friends.