Knitted pleats don’t only get fun when you try to do it yourself (DIY). It adds a more unified look and polishes your window/door. How to make pinch pleat curtains exposes you to how to give structural maintenance to your curtain, where you think it’s voluminous and rolling on the floor.
It gives the top of the curtain a fancy look and maintains a particular line shape, where you don’t need much fabric at the bottom part of the curtain.
In simple terms, pleat means to fold, knit, stitch, and pinch means to gather many fabrics at the top and sew permanently. You will learn the simple tricks/step-by-step process of how to pinch pleat curtains yourself in the comfort of your UK home.
To get the full knowledge of pinch pleating curtains, make sure you master the following under-listed steps. Note, do not miss action for any reason else; you’d completely wasted your time in reading this article.
Easy Steps On How To Make Pinch Pleat Curtains
These steps are essential and, when followed accordingly, give you the whole ways you make pinch appear curtains. Before discussing the steps, take note of the following;
- Measuring the cloth/fabric is essential for creating consistent pinch pleats at the top of the curtain – this is important because it corrects uneven pleats’ errors.
- Make sure you backstitch for the pinch pleat to retain its shape well.
- Make sure you pinch the pleats to give you the shape right.
- You need to know the number of fabrics for this project, measure your window width, and add 2-4inches for a seam allowance when pinching before pleating.
- To know the length of fabrics to be used in this tutorial, “how to make pinch pleat curtains,” measure from the top of the curtain rod to where you’d want your pleated. Add 6 ½ inches in the top hem of the fabric to create your rod pleats. Note that the pleats’ measurement should be 3inch because you will have to sew 5-6 pleats in total. Then, consider where you’d like to pinch pleat your curtain at the top so that they can be an overflow of the even pleated curtain to the ground.
Step #1: Spread the Fabric on a Panel
As earlier stated, you have a 1-inch space left on the panel after spreading your fabric on it. In creating the side seams, the material should be pressed ½ inch, folded over another ½ inch, and sew the edge. Make sure the top edge is kept unfinished for now.
Step #2: Marking the pleats with chalk at the top
In this step, start from the left, on the front of the fabric, measure 5 inches vertically (to the right), and then on the side, make an 8inch parallel line(horizontally) and mark both sides with chalk. Do this process again until you get to the end of the fabric.
Step #3: Pinning
Pin line 1 to line 2 marked earlier with chalk, line 3 and line 4, continually till you get to the last line and sew the top.
Step #4: Iron
Iron the pleats got so your new seam is at the centre of the crease at each point on the line fold.
Note: Seam is the starting point of fabric to either move from left to right or top-to-bottom.
Step #5: Sew
Sew your pleats 8 inches up and 8 inches down on both sides of the fabric. As you proceed in this step, the process of “How to make pinch pleat curtains” is almost done.
Fold ½ inch of the fabric from the top, towards the back, and sew across your pleats to create the sleeve (where you pass your curtain rod).
Step #6: Pinching the Pleated curtain
The final stage is completing “How to make pinch pleat curtains.” In this step, locate the upper part of the fabric – starting from the left to the middle and pin.
Start from the right hem and the middle ( where you have earlier pinned) and join the pinched fabric with the pinch one. You may decide to pinch in a cyclic pattern or any shape you’d wish.
How Far Apart Should Pleats Be On Drapes?
Each pleat should be stitched ½ inch from the fabric’s bottom using monofilament thread in this process. The standard spacing is five pleats to 54-inch width in the material. However, you can adjust to accommodate the length of your fabric.
Are Pinch Pleats Old Fashioned?
Yes, you may say pinch pleats are old-style, with the advancement and transformation of the world. For you to answer this, pinch pleats can never go out of style because pinch pleats only add a decorative top to your curtain with an elegant flow.
Where can Pinch Pleat Curtains be Used?
You can use Pinch pleat curtains on all kinds of interior décor in blending colour and beautifying the environment, still maintaining its privacy.
How Do Pinch Pleat Curtains Work?
When intending to pinch pleat your curtain, note that the pinch’s reason is to overflow the wrinkles from top to bottom. You can add extra beauty to the pinch pleats by attaching a button.
What type of pinch pleat curtain can you use?
The type of pinch pleat curtain you can is the cyclic pinch pleat curtain.
Conclusion
In considering the ways on “How to make pinch pleat curtains, “the steps listed above in this article should be applied. With a straightforward explanation of the process involved, you can make a pinch pleated curtain to add beauty to your apartment in the United Kingdom.